No I haven't. Man that's a BEAUTIFUL bike! Looks like you've done everything to it.
K9 Rebuild/Upgrade
- Thread starter 82ndAirborne
- Start date
Thanks...found them.
Not the best pictures. There wasn't a light inside my storage unit. Anyway, took care of a few last minute items, then gave it a good wash down. So, ordered Mirrors, V&H exhaust, Tribal shift and brake Pegs, Gasket for the Cam Cover, and brake cable clamps for the fork. I'll pull the Primary cover and I have a new Inner, I'll send that and a few other items to Space coast. My fenders and battery box covers SHOULD be done within a few weeks. When it comes back I'll take the bike to the paint shop for some minor paint (frame) repairs. He's also going to do the Primary replacement. After that I'll be ready for the Ceramic Coating Shop. I'm thinking that I may take it to a shop that has a DYNO and have them check everything out. I also plan to experiment with a type of oil/dye that if mixed properly can match the air filter with the powder coating on my Jugs.
Attachments
I know my V&H baffles have bet cut down. Anyone using the Thunder Monster Baffles?
Pretty amazing work.
Spent yesterday trying to get my storage unit converted into a shop with lights and electricity. Got a few rugs that feel alot easier on the tail than cold concrete. Speaking of cold, got a heater also. I'll pull the primary cover off tomorrow and get this last package sent off to Space Coast. I spoke with the guy from the Ceramic Coating Shop today. I'm going to have him coat the new V&H exhaust before I put it on. Hopefully this will prevent any blueing from starting. Also m, thought it would help having it coated UNDER the heat shields as well as on top. I'll start the cleaning/polishing process tomorrow. Stopped by the paint shop yesterday and tried to coordinate getting the bike in for the frame touch-up and primary swap. He's going to try and get me in/out so I don't pick up much
dust & grime from the shop...we'll see. I still have to let the paint cure for a month before adding the Ceramic Coating so I'll have a chance to do any final prep work. I'll go ahead and install the V&H at this point.
dust & grime from the shop...we'll see. I still have to let the paint cure for a month before adding the Ceramic Coating so I'll have a chance to do any final prep work. I'll go ahead and install the V&H at this point.
Attachments
So I ordered a set of Accutronix Tribal Hand grips...yes...the same ones I sent back a couple months ago when I realized they didn't fit. I'm going to send these along with my BIG DOG OEM grips to the machine shop that did the Forward Control Modification. I want to get an estimate on having a set made. Probably half the cost will be in labor for creating a C.A.D. File for the C&C machine. I couldn't get an estimate without first sending everything in so I really don't know what it's going to run. If it's not too crazy I plan to get it done. We'll, I've got plenty of work to do while I wait on everyone else to do their part. Oh...almost forgot. Just happened to notice that the M.P.H. LED indicator on my DAKOTA DIGITAL is upside down! Yes...all that will have to come back off. Spoke with a tech at their shop today and he told me he'll have to remove/install the LED. Minor delay. Timeline: 6 weeks for Space Coast, Fenders should be ready by then. In/out paint shop by end of February. 1 month cure time and final prep... puts me at end of March for Ceramic Coating.
Attachments
Has anyone used these Bolt caps before? Do they stay in?
Attachments
Shredder
Active Member
This orange air filter oil looks like it might be a good fit for your bike.
store.greenfilter.com
Part # 2807 Recharge Oil & Cleaner Kit (Orange)
High Performance Air Filters - Green Filter Part #2807
store.greenfilter.com
Appreciate that...couldn't find the orange.
Well someone said I'd have to do everything 3 times before I'd get it right. I just happened to notice that the M.P.H. LED is upside down on the Speedometer. Called DAKOTA and they told me to return it. So the good news is that I'm getting pretty good at removing the tank.
Attachments
Mastiff Rider64
Well-Known Member
I used them on a harley softail years ago. They held up pretty well, just made it more time consuming when needing to work on stuff.
I have a few areas (bolts) that always collect condensation and rust. Especially the Rocker box Bolts. I thought I might add a drop of Silicone grease inside the bolt head and then cap them off with the chrome caps. I only have this issue with Bolts that point upwards.
I ordered that this morning. Appreciate it.This orange air filter oil looks like it might be a good fit for your bike.
Part # 2807 Recharge Oil & Cleaner Kit (Orange)
High Performance Air Filters - Green Filter Part #2807
kickstart
Well-Known Member
Use some clear RTV, I put a small dab on a toothpick and apply it in the hardware and push in the cap. I have lost a few but most stay I figured that I did not use enough RTV to hold. I just use a pocketknife to take them off.
Jwooky
Well-Known Member
Yea and yea!
Great. I'm going to give them a try in the problem areas.
I have some black plastic caps on the Pitbull. Took me a bit to find the right size and I think I had to open the hole up a scosh? It was the exhaust mounts on the frame. They work great.
I'm going to give them a try.
Silicone behind them. They should hold.