Thunder max 309-340 exam

[Ribert R]

When you hit the start button, does it spin at normal speed or is it slow?

Tell you the truth it is hard to turn over with the Deka 310cca.i take the plugs out it turns over great and the compression will blow your hat off, blew mine off. I have a different batt, Fixin to go see if it’s charged get back to you .when I hit the starter button it wants to but I don’t think the battery was strong enough, it has hellacious compression


Sent from my iPhone using Tapatalk

 

[Mickmorris]

Tell you the truth it is hard to turn over with the Deka 310cca.i take the plugs out it turns over great and the compression will blow your hat off, blew mine off. I have a different batt, Fixin to go see if it’s charged get back to you .when I hit the starter button it wants to but I don’t think the battery was strong enough, it has hellacious compression


Sent from my iPhone using Tapatalk

Are the CR’s working? A Deka should spin it over no problem…

 

[Ribert R]

Are the CR’s working? A Deka should spin it over no problem…

Is there a way I can check them with a meter. I took the security system off and put a key switch back in it. One from a Harley. I’ll find a way to check the CR’S . The deka went bad . Would not even read on the charger anymore. 2 weeks and dead to the bone. Without the security system, still had zero fire to the plugs while pressing the start button . And coming from the right hand controls ( what is the orange and blue wires . Is orange the blinker and blue a power wire


Sent from my iPhone using Tapatalk

 

[Ribert R]

Ok, most certainly is EFI. I see a data port connection so the very first thing I would do is contact Thunderheart to see about diagnostic software.

I still don’t understand the comment “power to the plugs”. Are you saying you are measuring 12V at the plug wires? That woul not make sense. There should only be a high voltage pulse at the plug while cranking and running

Yes with the key on, the coil has power going in and going out to the plug wires. I haven’t been able to turn the engine over, I’m having to wait for another battery. When I get it I will check to see if it pulses like it’s firing properly


Sent from my iPhone using Tapatalk

 

[Ribert R]

Ok, most certainly is EFI. I see a data port connection so the very first thing I would do is contact Thunderheart to see about diagnostic software.

I still don’t understand the comment “power to the plugs”. Are you saying you are measuring 12V at the plug wires? That woul not make sense. There should only be a high voltage pulse at the plug while cranking and running

Yes with the key on, the coil has power going in and going out to the plug wires. I haven’t been able to turn the engine over, I’m having to wait for another battery. When I get it I will check to see if it pulses like it’s firing properly


Sent from my iPhone using Tapatalk

 

[Ribert R]

Can anyone tell me what this relay is for , it runs up to my EFI on the body part . And it was hooked to that box that nobody know what it is

From the relay there is a white/black stripe a green /black stripe and a blue. Going to the box that had a white, a black and a red wire along with a two prong plug that was not hooked up. The prick I got the bike from said the plug went to the neutral light area but didn’t match so he left it unplugged . If I take that box off where will the wires go that was hooked up to the box. I need to know what the purpose of that box is


Sent from my iPhone using Tapatalk

 

[Ribert R]

What is the address to wildsteed word in Tenn


Sent from my iPhone using Tapatalk

 

[Mastiff Rider64]

Are you sure this is an EFI bike? I didn’t think they made them until 07.

Regardless, the EFI /VFI is a completely separate module from the ECH.

The motor he was told was a 2011 107? But also says its register as a 2015 with an 04 117? I'm very confused. lol

 

[Mastiff Rider64]

What is the address to wildsteed word in Tenn


Sent from my iPhone using Tapatalk

If you are in TENN you should go see Knothead. He runs a place called 2cd Chance and works on Bigdogs. Wildsteed Workx is in Cali.

 

[Ribert R]

If you are in TENN you should go see Knothead. He runs a place called 2cd Chance and works on Bigdogs. Wildsteed Workx is in Cali.

Thank you that is who I was looking for. 2nd chance is the name?


Sent from my iPhone using Tapatalk

 

[Ribert R]

If you are in TENN you should go see Knothead. He runs a place called 2cd Chance and works on Bigdogs. Wildsteed Workx is in Cali.

I can’t find 2nd chance shop in Tennessee, said couldn’t find it


Sent from my iPhone using Tapatalk

 

[Mickmorris]

What is the address to wildsteed word in Tenn


Sent from my iPhone using Tapatalk

You see the little envelope in the top heading? Tap it.Then tap start a new conversation. Send a message to Knothead. He’s in Camden Tennessee.

 

[knothead]

I will go ahead and tell ya i am backed up little over 5 months closer to 6 months already. Hopefully you can find someone that can get to it

 

[Ribert R]

I will go ahead and tell ya i am backed up little over 5 months closer to 6 months already. Hopefully you can find someone that can get to it

Can I buy the EHC kit from you , the plug and play I can hook it up myself


Sent from my iPhone using Tapatalk

 

[Snuffy]

Can I buy the EHC kit from you , the plug and play I can hook it up myself


Sent from my iPhone using Tapatalk

If you search all the posts that you have commented on or posted you will get all the answers you seek. Good luck

 

[knothead]

Can I buy the EHC kit from you , the plug and play I can hook it up myself


Sent from my iPhone using Tapatalk

I dont care them I just buy them as needed.... wildsteedworx.com or bigdog.net has them in stock

 

[Ribert R]

I dont care them I just buy them as needed.... wildsteedworx.com or bigdog.net has them in stock

Thank you


Sent from my iPhone using Tapatalk

 

[Ribert R]

If you search all the posts that you have commented on or posted you will get all the answers you seek. Good luck

I’m going one school


Sent from my iPhone using Tapatalk