Need some help with clutch

[Five Five]

Good discussion, glad to see members helping out

 

[Allbike]

The blue one

 

[Allbike]

 

[woodbutcher]

the blue one may not match with the red paints but the red speedo tends to wash out and be hard to see in bright sunlight. FYI

 

[Allbike]

an update...

The gaskets times two are delivered today. (complete primary)
even a rebuild kit for the handlebar controls (just to be safe)
next week the bandit clutchkit including bearing carrier is coming in so then i can rebuild the clutch..

 

[Allbike]

the bandit clutch has arrived.

tommorow i,m going to work on the complete primary just to make everything perfect

 

[Allbike]

The bandit clutch is installed..
i installed it with 2 shims and now the clutch is working perfect.

the last mechanic who worked on the bike did use a lot of liquid gasket. so i cleaned it all and used the originalrubber gasket

there was an 9 plate clutch setup in this ridgeback.
i tapped almost 64oz of oil out of the primary so that was my biggest problem..

the rest was easy peazy just wrenching fitting and adjusting...

and offcourse the testdrive...there,s nothing better than a smile and a big dog who works fine...

thanx for the help everyone.

 

[Reddickracing]

Put the Bandit in mine also, Got some stock clutch parts if anybody needs them. And a stock VR

 

[Clubba]

Put the Bandit in mine also, Got some stock clutch parts if anybody needs them. And a stock VRView attachment 67883

Bandit makes clutches for RSD bikes?


Sent from my iPhone using Tapatalk

 

[woodbutcher]

Bandit makes clutches for RSD bikes?


Sent from my iPhone using Tapatalk

go with the Bandit Bruiser model.

 

[Marky-Marc]

If anyone is interested in a used Bandit Clutch for your RSD Big Dog, I have one we took off a customers bike to install a baker belt drive last week.....PM me an offer....This clutch came off a 2005 Big Dog Chopper with about 1200-1500 miles on the clutch...just PM me an offer....It's ready to go right into a big dog....

 

[Clubba]

I’m running a baker belt drive now. I just found out I can get a stronger diaphragm spring that might fix my slipping issues. Thank you though.

 

[Clubba]

I’m running a baker belt drive now. I just found out I can get a stronger diaphragm spring that might fix my slipping issues. Thank you though.

I also have a complete stock primary and extra “new” gaskets and bolts if anyone needs them. I also have the original 117” motor. Runs great. I just wanted the 140” monster motor.


Sent from my iPhone using Tapatalk

 

[Kwil2495]

Message send to kaptinamerica

Do you happen to have a clutch basket and all the parts for a 2005 117 Ridgeback? k_williams63@hotmail.com , thanks

 

[Kwil2495]

I also have a complete stock primary and extra “new” gaskets and bolts if anyone needs them. I also have the original 117” motor. Runs great. I just wanted the 140” monster motor.


Sent from my iPhone using Tapatalk

Do you have a clutch hub and everything that goes with it?

 

[Mickmorris]

Do you have a clutch hub and everything that goes with it?

You can contact Curtis at wildsteedworx.com.

 

[Kwil2495]

If anyone is interested in a used Bandit Clutch for your RSD Big Dog, I have one we took off a customers bike to install a baker belt drive last week.....PM me an offer....This clutch came off a 2005 Big Dog Chopper with about 1200-1500 miles on the clutch...just PM me an offer....It's ready to go right into a big dog....View attachment 69624View attachment 69625

Do you still have this clutch?

 

[Kwil2495]

You can contact Curtis at wildsteedworx.com.View attachment 135954

Thank you

 

[Snuffy]

Do you still have this clutch?

That post was over 6 years ago. The chances are slim.

 

[Mickmorris]

Do you still have this clutch?

Marky-Mark ain’t been on in awhile. I think he moved overseas or something.