Key Switch!

[flcmcya]

The EHC is Gold....looks pretty original.

Digging in....Don't see a relay on the diagram...... had a tech swap to a dual coil ....shouldn't be for that.

 

[flcmcya]

Located the comprehensive diagram.......Horn relay

 

[chubs]

For sure.......Add this to the post above......Put in a new relay and nothing.

K9 LE....pretty sure its stock....... pulling the starter for a test as well.

You might also remove the end plate from the starter solenoid and check the little bare wires that are attached to the terminal the green wire hooks to. One of those little wires on my bike broke and kept it from cranking. Soldered it back together and haven't had any trouble again. (Just a thought.)

 

[flcmcya]

Thanks Chubs...pulling that tonight!

 

[flcmcya]

Making good progress. Had the starter checked out.....All good.
New EHC is here....... would be a good time to add something between the battery and EHC...What goes there?

 

[Snuffy]

Making good progress. Had the starter checked out.....All good.
New EHC is here....... would be a good time to add something between the battery and EHC...What goes there?

An inline fuse.

 

[Rottweiler]

An inline fuse.

X2 yes

 

[flcmcya]

Everything hooked up.....and......click!

 

[Mikeinjersey]

Everything hooked up.....and......click!

When you hit the start button do the Compression releases Click? At the same time do you get 8 to 12 vdc at the green wire going to the starter solenoid ?

 

[flcmcya]

CR’s click…no voltage at the green wire.