Help! Belt issue.

[Mickmorris]

Look close @ the pully teeth. Towards the inside you can see the wear from the belt being offset. Looks awful sharp to me. Im getting old tho..

Yeah I see that now Harry. You’re probably dead on with that assessment!

 

[chubs]

When you get the rest of that ruined belt off, can ya give us a good clear picture of the pulley ? Also, how are you aligning the wheel pulley with the tranny pulley?

 

[wyopsycho]

Rear tire had/has maybe 50 miles in it. I also changed bearings at that time as well.

 

[wyopsycho]

When you get the rest of that ruined belt off, can ya give us a good clear picture of the pulley ? Also, how are you aligning the wheel pulley with the tranny pulley?

Put belt on put a touch of tension on it and spin it. Make sure it’s tracking straight. I also have marks on both sides I put on there. I miced it and made marks.

 

[wyopsycho]

I ordered a 132 1 1/8th this time. I bought the smaller pulley from Barnes a few years ago since I have to pull it apart and do all this again. I might as well put all the new parts I have in it in it.