Best Bigdog Mechanics in each state

[Mickmorris]

i need a Big Dog Mech in NEW MEXICO

You could /should hire yourself. You'll be better off wrenching on your own sled.

 

[adamleecadena]

You could /should hire yourself. You'll be better off wrenching on your own sled.

Yeah i agree, It just clicks once when i press start. Ive wired and rewired. The wire plus ehc checked out clean by curtis, im just angry, i just wanna ride

 

[Mickmorris]

Yeah i agree, It just clicks once when i press start. Ive wired and rewired. The wire plus ehc checked out clean by curtis, im just angry, i just wanna ride

Battery is good.. All your grounds are good.. what hand controls are on your bike? Year/model?

 

[adamleecadena]

2005 pitbull.

 

[Mickmorris]

2005 pitbull.

Maybe you should think about getting a slam button for the starter. Could be your switch is bad. I know a guy with a ‘06 Chopper and he had that same problem. We switched out his boards and it took care of the issue. Slam button is a option though

 

[chubs]

Just a thought, but while ya have the cover off the solenoid, how do the contacts and disc look? I put a slammer on my pit, "just in case", and while the cover was off I gave all the contacts a good cleaning. Haven't had to use the button yet.

 

[Cruz Dog]

Good luck finding someone in New Mexico. I’m from Roswell NM they’re right your better off starting to wrench yourself. For ever I was paying “mechanics” to fuck up my bike. With this forum and a lot of help from a lot of different members on here I’m starting to feel confident and can take care of a lot of issues. Don’t get me wrong I still fuck shit up but so we’re the so called mechanics.

 

[BigDogRick]

Newb here.
I saw Phoenix was asked about a couple of times. Was there a response?

Black Canyon Motor Works - Scot Bettin - Scot has upped his game significantly since I started using his shop. Doubled his space and brought on some really great v-twin mechanics.

 

[Pddain]

Ok my mechanic in Huntsville Al is out of business. Y’all know any one who can replace my CRs. They are both bad.

 

[Mr. Wright]

Come on Paul, it's not rocket science. I'm sure you can handle it yourself.

 

[Pddain]

my concern is what I don’t know. Got some guidance on what to do or avoid. Anyone have the tool I can borrow Or rent? I need a new rubber boot as well. Will talk to Eric. I am not a mechanic but learning.

 

[Tim briscoe]

South West Virginia/North East Tennessee.
Me. Not really true but I've never trusted many people to work on my stuff.
I call / email Curtis in San Diego when I'm over my head.

 

[Mickmorris]

I know a guy in Tennessee. Smart as a whip when it comes to BigDogs .

 

[Mickmorris]

my concern is what I don’t know. Got some guidance on what to do or avoid. Anyone have the tool I can borrow Or rent? I need a new rubber boot as well. Will talk to Eric. I am not a mechanic but learning.

Hey Paul, I am pretty sure that the new cr’s comes with the rubber boots. I have the tool that you need. PM me your address and I will send it to you.
Mick

 

[Pddain]

Hey Paul, I am pretty sure that the new cr’s comes with the rubber boots. I have the tool that you need. PM me your address and I will send it to you.
Mick

Will do.

 

[Drdave427]

Knoxville TN area - me
But I’m booked up or sauced up usually

 

[XxTimeTO$lowdown36]

Minnesota: Jeff Moll @ Fury Motorcycles in South St. Paul.

DONT GO TO FURY!!! WHATEVER YOU DO, ALLS THEYVE DONE IS MESS MY BIKE UP TERRIBLY. AND NOW ALL THE GEARS DONT WORK AS THEY SHOULD

 

[Mello]

Thanks for the kink words my friend.

Hi RRRuff, are you still in the bsuiness of repairing big dog choppers in the Atlanta area?

 

[Mello]

In GA RRRUFF is the best

In GA RRRUFF is the best. He is the only person I
would trust to work on my bike. :up:

I see this post is over 10 years old which is why I can't seem to find RRRUFF in GA. Any chance they're still in business? If so, can you share their contact info. Thanks.

 

[knothead]

I see this post is over 10 years old which is why I can't seem to find RRRUFF in GA. Any chance they're still in business? If so, can you share their contact info. Thanks.

If you cant find no one i might be able to help you...i live in West Tennessee 5 hours from Atlanta....i know thats a long haul but i can help if needed....i charge 40.00 an hour...