Anyone else have tire wear like this ??

[Th3InfamousI]

I can tell you it is definitely different. BD made a wise choice going to the right side drive. Right side drive is balanced better.

I don't notice any difference in balance...maybe when your just sitting on it but once it's rolling it's the same too me.

Actually with a 250 tire I can whip that bike around a lot easier than a 300.

Also the benefit to an 04 is you have unlimited options for transmission and clutch parts. The only thing on 04 in my opinion is you have you have to look for the fully polished engines, some have the satin finish on the bottom and it's just not as pretty. Actually some 05 have that problem too. I don't know why they went back and forth. Once you get rid of the EHC you are good to go. The 04 EHC if original is the absolute worst one there was a recall because the harness wouldn't even stay clipped in.

Sent from my 2PS64 using Tapatalk

 

[bigkelk9]

I don't notice any difference in balance...maybe when your just sitting on it but once it's rolling it's the same too me.

Actually with a 250 tire I can whip that bike around a lot easier than a 300.

Also the benefit to an 04 is you have unlimited options for transmission and clutch parts.

Sent from my 2PS64 using Tapatalk

I thought it was still a baker.. what did they use in 04? That's great to know because I know my buddy who has a custom (that's the name brand) chopper, he claims he always leaning and when riding behind him I have noticed it over n over regardless of winds.. so I'm kinda curious before a big purchase ya know

 

[Th3InfamousI]

I thought it was still a baker.. what did they use in 04? That's great to know because I know my buddy who has a custom (that's the name brand) chopper, he claims he always leaning and when riding behind him I have noticed it over n over regardless of winds.. so I'm kinda curious before a big purchase ya know

2004 is a baker six speed typically but it's a standard Harley 6 speed anyways. Some 04's may have a Jim's Case and Baker guts. 04 was a hodgepodge year, either way they are interchangeable with any Harley part.

Basically any Harley softail clutch or transmission from the 90's will work. Ultima, baker, whatever.

Sent from my 2PS64 using Tapatalk

 

[bigkelk9]

2004 is a baker six speed typically but it's a standard Harley 6 speed anyways. Some 04's may have a Jim's Case and Baker guts. 04 was a hodgepodge year, either way they are interchangeable with any Harley part.

Sent from my 2PS64 using Tapatalk

That is really good to hear.. very informative! Thanks!!

 

[Th3InfamousI]

That is really good to hear.. very informative! Thanks!!

The stock transmission in an 04 will last you a long time unlike the 05-07 models. No weak mainshaft to worry about or Clutch carrier and Hub issues. Or Voltage regulator fires..haha

Also any Harley EVO starter will drop right in so never have to worry about those parts.

Gaskets, bearings, etc are just Harley off the shelf if you need something.

Speaking of tires you'll get 15k easy out of a 250 size too. Whereas the 300 has about half the life.

04 are great bikes if your okay with the 250. Just an FYI the 04 Chopper is a little shorter than your k9 too, so I will admit they look a little more compact. My 04 risgeback and the k9 have the same length though.

I'm had something else and now I can't think of it.

If I didn't get a chubby everytime I see a 300 I probably would have sold the k9 by now and got an 03-04 chopper.

Sent from my 2PS64 using Tapatalk

 

[Dragonslave]

I'm looking at 9k for an 04 with 8900 on it.. good or just stick with 05 and u or right hand final drive??

Its not bad but I can tell a difference. Either way you will like it. Hell you may not even notice.

 

[chubs]

Maybe that's it, my ass is heavier on the left side!

Move that big ass wallet to the other pocket! OR, just download some of that cash ya keep stashed in there! I'll hold it for ya !!

 

[Dragonslave]

The stock transmission in an 04 will last you a long time unlike the 05-07 models. No weak mainshaft to worry about or Clutch carrier and Hub issues. Or Voltage regulator fires..haha

Also any Harley EVO starter will drop right in so never have to worry about those parts.

Gaskets, bearings, etc are just Harley off the shelf if you need something.

Speaking of tires you'll get 15k easy out of a 250 size too. Whereas the 300 has about half the life.

04 are great bikes if your okay with the 250. Just an FYI the 04 Chopper is a little shorter than your k9 too, so I will admit they look a little more compact. My 04 risgeback and the k9 have the same length though.

I'm had something else and now I can't think of it.

If I didn't get a chubby everytime I see a 300 I probably would have sold the k9 by now and got an 03-04 chopper.

Sent from my 2PS64 using Tapatalk

Same here. 300's are chubby material

 

[chubs]

Same here. 300's are chubby material

OUCH !!

 

[Th3InfamousI]

I'm looking at 9k for an 04 with 8900 on it.. good or just stick with 05 and u or right hand final drive??

There's an 04 on eBay or was for 6,500 about the same mileage. Went unsold! He started at 7,500 then 7000 then didn't even sell at 6500. Seller is just a town over from me.

Was a steal! However the bottom end isn't polished.. Just a slight disappointment.


Will be a LONG time before I'm in the market again unfortunately.


Sent from my 2PS64 using Tapatalk

 

[Th3InfamousI]

There's an 07 pitbull near me 6000 miles it's solid green looks perfect I think he is down to $7500 best offer

That's cause it's always snowing or cold.

That's a good deal for an 07 ...think the wife might need it?

Sent from my 2PS64 using Tapatalk

 

[BWG56]

Hey, I was gunna ask about that final left side drive and how they handle as far as balance.. I'm looking into a 04 chopper..

I thought you were saving up for new foot pegs. WTH

 

[BWG56]

I don't know if running the rear tire out of alignment is a good idea Kel, I know my belt is really close to the tire but I would rather have it slightly rub the tire than run it out to clear it, seems like it would effect the handling of the bike.

I agree, that's why I filed some of the side wall down on the tire, running the tire on an angle is not a good idea.

 

[Th3InfamousI]

Been half ass looking for a bulldog or coyote but those seem overpriced comparatively speaking

The 04 mastiff are shorter in length with a 250 tire should be easy for her to handle

Sent from my 2PS64 using Tapatalk

 

[Th3InfamousI]

I was wondering if they were shorter

Yep they are shorter and cheaper too. Hell you should be able to pick up an 04 mastiff for 5-6k

Sent from my 2PS64 using Tapatalk

 

[Th3InfamousI]

I'll have to keep my eyes open that's about what I can get for the nightster

Was a guy on here Mike that traded his in for a new Ultra. He got rid if the dog and the street glide and got an ultra in a downsize moment.

I rode with him a few times he would have taken 6 I'm sure of it as I recall that what he got in trade, so I'm sure he would have rather sold it to someone. And it was a nice bike!

Sent from my 2PS64 using Tapatalk

 

[Th3InfamousI]

I'm sure something will pop up she loves her bike I wast thinking of doing a 240 or 250 kit on it this winter but ooops I left em in Florida

Arent those like 2-3k? Kinda pricey upgrade.

Sent from my 2PS64 using Tapatalk

 

[BWG56]

Yea that's why I'm on the fence about it

When you open your wallet, do moths fly out

 

[bigkelk9]

I thought you were saving up for new foot pegs. WTH

Not so much saving up as to I don't wanna drop that much money on foot pegs.. lol. I find good deals every now n then on ebay and that's what I'm kinda waiting for.. I'm a frugal kinda guy and don't get n e thing unless it's a damn good deal.. that bike I can probably get for 7500..

 

[bigkelk9]

I don't think the pegs are proprietory so many will workbut then there is the issue of having matching grips which to me is very important

Thats kinda why I'm looking for the full set of revolvers.. big dog has em for 599 for the complete set and shovelheadkicker (Donna and derek) had em on ebay for 399 and I was too late when I got around to transferring money to pay, it had eneded.. so I'm just patiently waiting..