That is how it is on my 06 K-9I believe once you do the WP...you will have your kill switch function back...you won't have the EHC anymore...don't know if your 03 is different from my 06...Thanks Dave. I had a shop install a crane ignition and we had them do the install by bypassing the EHC and wire directly to the battery/coil and switch. I lost the kill switch on the handlebars during this process so know everything is done through my key. Definately some ketting use to. I was hoping the wireplus would get my kill switch functioning

cool! Thanks BradThe Wire Plus for the '03 is "plug and play". You will need to re-wire your coil back into the harness where you took it from and the kill switch will work. The only re-wiring required from the '03 are the wires going to your dash lights. Good luck!
I knew the 03's were different from my 06....was typing at the same time..lol
