
X2:2thumbs:Spray some silicone spray on the belt. If the squel goes away then do as Woodbutcher suggestion. Alignment and tension.
I think there was a SB out on this and sometimes it required shiming one side of the tranny to get it aligned properly.
![]()
![]()
Yup, Raywood is correct. I had that same noise and tore my entire primary off and replaced the bearings thinking that the bearings were failing. Turned out to be my rear belt needed some belt dressing.X3.....................................
Damn you and Ray must be hangin out together. What with him tearing down his top end because of a rattle that was actually coming form the gas tank vent tube and you tearing...................Yup, Raywood is correct. I had that same noise and tore my entire primary off and replaced the bearings thinking that the bearings were failing. Turned out to be my rear belt needed some belt dressing.![]()
