Well I did something today

Mastiff Rider64

Mastiff Rider64

Well-Known Member
No actually it happened I guess when I was either cleaning out the holes with a tap or it had been that way since installing the rsd. I didn't even notice it till trying to put the new breather plate on and the top screw never got tight.
 
S

Scoot7102

New Member
41bigdawg said:
Thanks for the kind words :) Those are the Mean Mothers slip ons, love the way they sound.
Click to expand...
Do you have to do any tuning when switching out your slip ons pipes with the EFI on the Baggers? I’ve read the EFI will remap itself on small mods.
Next I’m trying to figure out if the Spike Air cleaner will work ?
Any help will be greatly appreciated!


I just found and purchased a 2010 Bagger a couple weeks ago. Previously I had an old Boxer that had Carb
My Bagger has been in shop getting rocker box gaskets replaced for oil leak! Ever since I got it home. Sucks! So I haven’t had a chance to look or figure it all out. I want to upgrade pipes, I found the mean mother slip ons but wanted V&H Big Radius pipes I haven’t been able to verify the ones I found on up work on the Bagger EFI ? )
 
Mastiff Rider64

Mastiff Rider64

Well-Known Member
Scoot7102 said:
Do you have to do any tuning when switching out your slip ons pipes with the EFI on the Baggers? I’ve read the EFI will remap itself on small mods.
Next I’m trying to figure out if the Spike Air cleaner will work ?
Any help will be greatly appreciated!


I just found and purchased a 2010 Bagger a couple weeks ago. Previously I had an old Boxer that had Carb
My Bagger has been in shop getting rocker box gaskets replaced for oil leak! Ever since I got it home. Sucks! So I haven’t had a chance to look or figure it all out. I want to upgrade pipes, I found the mean mother slip ons but wanted V&H Big Radius pipes I haven’t been able to verify the ones I found on up work on the Bagger EFI ? )
Click to expand...
Well you'll first have to have o2 bungs welded into the pipes for the o2 sensors, I've not found a set of Vance and hines that will fit the RSD of a big dog with the o2 sensor ports already in them, then you'll have to make a mounting bracket that supports the rubber mount motor. I found the company that makes the factory rubber mount support piece on the bracket on our bikes now. I actually already ordered a few because I have 3 different pipes I want to try out on my bagger since I have an unlocked VFI, cam and small bolt-ons for added HP. I have a Kerker 2 into 1 that came off a 2008 Mutt I really want to try, Then I also want to cut my slip-ons by about 6 to 8 inches and try them, but I want another bracket to support them to make cleaning the rear wheel and rear pulley easier, and I want to try the Vance and Hines big radius 2 into 2 also. My issue at the moment is having time to tear down, mock up for the bracket and finding someone to make and chrome the bracket. Another issue is that the Vance and Hines go between the nose cone and floorboard, there may be a clearance issue there if you don't use the 2.5 inch peg extensions.

I did find one guy on Facebook market place selling his bagger and asked him to please send me pictures of how his Vance and Hines 2 into 2 big radius pipes mounting bracket was made and how it was installed but he never sent the photos. I had also asked where and who made it and he told me it was done years ago and the shop was now out of business, still would have like to know the name of the place but he kept that to himself too.
 
Mickmorris

Mickmorris

Well Known Member
Supporting Member
Mastiff Rider64 said:
Well you'll first have to have o2 bungs welded into the pipes for the o2 sensors, I've not found a set of Vance and hines that will fit the RSD of a big dog with the o2 sensor ports already in them, then you'll have to make a mounting bracket that supports the rubber mount motor. I found the company that makes the factory rubber mount support piece on the bracket on our bikes now. I actually already ordered a few because I have 3 different pipes I want to try out on my bagger since I have an unlocked VFI, cam and small bolt-ons for added HP. I have a Kerker 2 into 1 that came off a 2008 Mutt I really want to try, Then I also want to cut my slip-ons by about 6 to 8 inches and try them, but I want another bracket to support them to make cleaning the rear wheel and rear pulley easier, and I want to try the Vance and Hines big radius 2 into 2 also. My issue at the moment is having time to tear down, mock up for the bracket and finding someone to make and chrome the bracket. Another issue is that the Vance and Hines go between the nose cone and floorboard, there may be a clearance issue there if you don't use the 2.5 inch peg extensions.

I did find one guy on Facebook market place selling his bagger and asked him to please send me pictures of how his Vance and Hines 2 into 2 big radius pipes mounting bracket was made and how it was installed but he never sent the photos. I had also asked where and who made it and he told me it was done years ago and the shop was now out of business, still would have like to know the name of the place but he kept that to himself too.
Click to expand...
Good info! Nice to see a post from you!
:cheers:
 
You must log in or register to reply here.
Top