Turn signal connectors

nine lives

nine lives

Active Member
Ok, was in the process of putting my new struts on to except my sissy bar. I get to the connectors:bang: Pushed out all the wires except one, would not budge. Snapped the fuckin thing. Any one know where I can get that type of connector besides BDM? Radio Shack maybe?
 
mobsta

mobsta

Well-Known Member
If not radoi shack I believe some guys have gotten them at Fry's Electronic's.I think lol
 
Mickeetwo

Mickeetwo

Guru
I broke one of mine off back in 07 when I replaced my struts for the sissy bar. I filled the connector up with clear silicone and stuck the wire back in the connector and let it set overnight. Has been that way ever since. I did get the jst metal connector from WB Cycles but never put it on. Its been this way for 4 years.
 
kingbigwig

kingbigwig

Member
If the 2006 is the same as my 2004, goto Digi-Key.com and look-up JWPF connectors in the online catalog.
Kevin
 
nine lives

nine lives

Active Member
I'll get the correct connectors now that I know what there called , thanks Kevin. If I can't find them tomorrow, I may do a temp fix like Alan used. Thanks guys.
 
linx

linx

Active Member
It should be almost identical to the prongs or connector on a CPU fan from a computer. I broke one, and used one from a 12v fan from a CPU processor.
 
nine lives

nine lives

Active Member
If your ever in a bind like I was breaking the turn signal terminal block, do like Linx says. Tore apart my old computer and found three connectors that plugged right into the LED board.
 
linx

linx

Active Member
nine lives said:
If your ever in a bind like I was breaking the turn signal terminal block, do like Linx says. Tore apart my old computer and found three connectors that plugged right into the LED board.
Click to expand...
Sweet. Glad it worked for ya :2thumbs:
I knew all those years working with computers would pay off, lol. Thank God I work outside now! :D

Like I said, I did the same thing. It's been almost a year ago..I meant to post it on here but musta forgot.
 
Mickeetwo

Mickeetwo

Guru
nine lives said:
I'll get the correct connectors now that I know what there called , thanks Kevin. If I can't find them tomorrow, I may do a temp fix like Alan used. Thanks guys.
Click to expand...
Ninelives.......let me know if you can't find one and I'll look and see if I can find the one WB Cycles sent me. I think he sent me a couple of them. I'll give you one. I've got TP rocker boxes, EHC, hole in my drive belt and rear tail light wires held together with clear silicone (17,000 miles).......I like living on the edge anyway :D
 
You must log in or register to reply here.
Top