Thunderheart Micro Harness Controller

francoblay1

francoblay1

The Spaniard
I have not heard much about it.... is there anyone using it? Pros & Cons, etc?

TH webpage: ASM4260

[ame="http://www.amazon.com/Thunder-Heart-Performance-Harness-Controller/dp/B000LQLBLU"]http://www.amazon.com/Thunder-Heart-Performance-Harness-Controller/dp/B000LQLBLU[/ame] $245.00 & Free Shipping.

:cheers:
 
TimNY

TimNY

Well-Known Member
Franco
I have the Thunderheart set up in my bike .
Was very easy to install ( even a carpenter can do it ) !
All the wires were color coded and had writing on the wire where it goes.
Everything was there starter,lights,directionals, voes - one wire at a time .
The main controller fit in the recessed area of the rear fender just fine .
simple install - they also have a great tec guy who I called a few times during the wireing . colors matched up to H.D. switches.
Have had 3 years trouble free. I <3 my chopper !
READ HOME DAWG ALIVE AND BARKING - search in the general forum .
 
Little-Boo

Little-Boo

Well-Known Member
Troop Supporter
Looks like a very clean set up, and recommend by Andrew on another post. My question is this, does one have to switch to HD controls to be able to use it or can you use it with the existing BDM controls. :loony: I have the WP and may go to the PMD (which I already have) and which does not have the self cancellation turn signals. That is where this beauty would come in to play. Just thinking out loud :D

Carlos
 
KaptinAmerika

KaptinAmerika

Guru
The Thunderheart does require their momentary switch adapter for 04 and newer Big Dog Controls. Carlos you can buy a blinker cancelation module for that issue with the "PDM". Let me know if you need one as I can get it for you.
 
Little-Boo

Little-Boo

Well-Known Member
Troop Supporter
KaptinAmerika said:
The Thunderheart does require their momentary switch adapter for 04 and newer Big Dog Controls. Carlos you can buy a blinker cancelation module for that issue with the "PDM". Let me know if you need one as I can get it for you.
Click to expand...
Thanks Curtis go ahead and get one for me, that way I'll have one in hand when I get the time to install the PMD.

Carlos
 
B

bigdogtech01

Well-Known Member
Yes they work great on any year big dog. But like Curtis said, you need the $50 switch controller for the 04 and up. I'm having a slight issue with one right now with an EFI bike. This is first I have installed onto EFI. Everything works other than the fuel light is staying on...not sure why. Need to investigate further. Otherwise, all other functions work.
 
GDOG_PITBULL

GDOG_PITBULL

Well-Known Member
KaptinAmerika said:
The Thunderheart does require their momentary switch adapter for 04 and newer Big Dog Controls. Carlos you can buy a blinker cancelation module for that issue with the "PDM". Let me know if you need one as I can get it for you.
Click to expand...
Do we also need a module for the brake light? I also need a 30 amp circuit breaker for the power line. I am also wondering about a starter relay ....need? Do not need?
Thanks
G
 
You must log in or register to reply here.
Top