Speedo Replacement

Energy One

beano

Member
I think i need to replace my speedo on my 02 pitbull. any other brands fit or gotta be 1 from BD? Where can i get a BD for an 02?:confused:
 

beano

Member
Ok thanks. i need to make sure its my actual sppedo thats my prob first. It just keeps flashig Adjus,PULSE,and one other word like OCEL. weird huh? Also my calibration button does nuthing any more.
 

stlmikie

I wish I had more money.
You may pull your speedo sensor and clean it off and check your wire from front to rear to make sure it is intact. Did it just start acting up or was it gradual ?
 

beano

Member
It was sort of gradual my calibration button would fix it for a little while then it would begin flashing again now the button does nothing
 

beano

Member
Ive cleaned the sensor before and i will again just to be sure bet ive never checked the whole wire. I did disconnect it from the bike and hook up the hot and grnd wire to a batt and it does the same as it does when on the bike but that has nothing to do with my speed sensor wire.Would it even have to have a reading from the speed sensor if the bike is
sitting still?
 

beano

Member
Mine does not have 2 studs to tighten it down. The body of mine has threads and a cap squeezes it tight against the chrome on the tank.
 

BADOG

Active Member
I've done a lot of upgrades to my dog, one of the best is the Dakota Digital I got from Don at Value Teck.
I highly recommend it and Value Teck. :up:
 
Top