Rewired EHC

[Gdog]

Took me about 4 hours but I rewired the EHC in my 2006 K-9. I used the stock controls. Had to use a bunch of relays due to the negative voltage from the controls. Everything works but the turn signals. I am going to install a delay module for them. I was able to use the existing ignition switch. I only hooked up the low beams. I used all bosch standard 12 volt relays. A little big but they work great. I was too impatient to wait for the wire plus system!! At least I'm back on the road!!

 

[HMAN]

Good deal. Glad your running again.

 

[Nukeranger]

:2thumbs:Awesome work! Good to hear and thanks for sharing.

If you get a chance, post some pictures.

 

[Raywood]

Thats great

 

[Five Five]

That's a task for sure and not an easy one from scratch.
nice job :up:

 

[Maxim_es]

Impressive!! Picts are always welcome.

 

[Gdog]

Thanks. I will put up pics this weekend. I installed car audio and alarms before I became a Sheriff. Thought I was done with wiring!!

 

[DemonK9]

when you say you rewired it, first question is the EHC TOAsted? and did you actually have a fix for the ehc??? Is that what you are saying? If so pleaaaaaaaaaase pass the info/drawn up blue prints, listing of parts.

 

[Tim]

Like everyone else, I'm down for the details. Congrats on fixing your scoot.

 

[BigDogBro1]

Congrats on the rewire job.

Just a F.Y.I. on the BDM hand controls.

The hand controls used on our bikes are stainless steel dome contact switches.. They are designed to collapse when presssed to make contact from their outer circular edge to the center contact point on the circuit board.

These types of keypad switches are designed for low current signal switching into our EHC module....meaning that they should only be used to switch LOW current circuits. Low current, in the range of 10 to 100 DC milliamps which is about the current draw for a small 12v relay.

Running high current through these dome switches and small trace contacts on the circuit board will eventually burn out the switch.

Use a relay to switch the higher current circuits.

Cheers

 

[RRRUFF]

Great job, throw up some pics and details.:2thumbs:

 

[Srodden]

Impressive ! Fact I need the right side switch for mine. Still works just no clicky on the right turn signal.

 

[Mickeetwo]

Nice work :2thumbs:

 

[jimizee028]

Whats more impressive is that your the SHERIFF.....

 

[Jwooky]

Very nice. Look forward to details and pics.

For sure controls need low side relays, cannot handle high current.

 

[DemonK9]

Still waiting with bells and whistle's for details mr Sheriff sir......

 

[theone0119]

Yea I feel your pain, I have been waiting for 10 weeks for my kit, any pics or details, I have a 2006 Pitbull big dog Pitbull.

 

[Tim]

Welll I'm calling out bull shit.....maybe I'm just pissed off because my scooter is down still week 3.......

Calling bull shit on some one you are asking for help from is always a great idea.

Sent from my SPH-D700 using Tapatalk 2

 

[Nukeranger]

when you say you rewired it, first question is the EHC TOAsted? and did you actually have a fix for the ehc??? Is that what you are saying? If so pleaaaaaaaaaase pass the info/drawn up blue prints, listing of parts, out to everyone so these assholes making 500.00 bucks for a piece of shit fix can eat a dick. and get brothers on the road! ME for instance.

I don't think my EHC is a POS. For a few months my EHC would shut down every day but I replaced the connector under the ignition cover. If you don't have a good battery connection it will shut off the EHC. Now I think I get a shutdown once a month and I will figure this out also. I must say that you are not encouraging others or myself to share with you by letting yourself get frustrated then calling people $$sholes and telling someone they can eat $$$$. I hope you get the point!


Sent from my iPad using Tapatalk HD

 

[DemonK9]

I'm am just pissed off and feel my comments are rude and unbecoming and I appologize to everyone"......... I have a bad habit of biting the hand that feeds me and also just anyone who has a hand out ...... Even if it is extended to help. Yes I have learned lessons the hardest way possible.:bang::bang::bang: