Replacing BDM EHC

[Live to ride Ride to live]

I'm junking the BDM EHC and installing the Wire Plus module. On the BDM wiring diagram it shows on the B plug #30 power to acc. tach red wire and #48 signal to acc. tach yellow wire and in the Wire Plus diagram and in the how too posts it shows no place to use # 30 and # 48 wires, do they not get used and caped off. Thanks for the help.:bang:

 

[bdmridgeback]

If your bike has the Optional Tach Port under the tank, which was started sometime in 2006, here is how to hook it up:

The plug consists of #B48 yellow wire, and #B30 red wire.

The #B48 should go with #B47 and #A5 wires.
The #B30 should go with #A15,#B31, and #B32.

Hope that helps, I will update my How To thread now to include this.