Replace starter 2008 American Ironhorse Texas Chopper

Energy One
cd24747

cd24747

Active Member
Ordered another starter. It should be here 09/08/2011. I'll post my results. Keep the advise coming!!!
 
cd24747

cd24747

Active Member
Ok. So I put the new starter in and tried starting without the primary cover on so I could make sure it worked before I put it back together. The starter is engaging but it won't spin the gear. It just unscrews the bolt that holds the gear on to the starter. Any thoughts?
 
C

ChoppaNoob

Active Member
Completely new starter ? Did you get the spacers and everything fitting back together correctly ? Mine had a lockwasher that kept that bolt from spinning. If you dont have that, you could always use threadlocker.
 
cd24747

cd24747

Active Member
What did the lock washer look like? If I used threadlocker would I ever be able to take the bolt back out? Any other input is greatly appreciated.
 
KaptinAmerika

KaptinAmerika

Guru
If you don't have compression releases I would highly recommend either an electric setup or the S&S easy start cam which I don't have on my site yet but I can get them. This will greatly extend the life of your starter.
For a starter
GOOD (I know it says Big Dog but it will work in your AIH)
BEST(Same thing says Big Dog but will work in your AIH)
 
pauldeepsea

pauldeepsea

Guru
Personally I like the ultima starter comes with a slam button installed and the price is right! X2 on the compression release! The big inch motors kill the starters with the amount of compression.
 
RCAdd1ct

RCAdd1ct

JAFO
2008 AIH has compression releases like BDM.

The starter is hidden under the fake oil tank and a slam button might work if an extended button is made.

Do you have an open primary, I forget?

Primary oil in the starter causes issues sometimes.
 
cd24747

cd24747

Active Member
Enclosed primary. Taking the starter it to my buddy tomorrow to see if he can pull it apart to see whats wrong with it.
 
You must log in or register to reply here.
Top