replaacing rear wheel bearings

[moesterman]

Just removed my rear and plan on taking it to the HD shop tomorrow to have them install new Timken bearings. I removed the drive pulley and was wondering if I had to remove the rotor and hubs as well. I did repalce the front bearings w/o removing the rotor and hubs but wanted to be sure about the rear before I dropped it off. .

 

[Mr. Wright]

If someone else is going to do the work, remove them before they bend something and screw you.

 

[BigDogBro1]

Make sure you mark the hubs so they go back together exactly the same way. That means bolt hole positions as well.

 

[pknowles]

Make sure you mark the hubs so they go back together exactly the same way. That means bolt hole positions as well.

just like "clock" work.