Removing tail lights from 2005 B.D. Chopper???

[CoorsBoy]

I am in a bit of a quandry here, fellow dog owners! I have removed my front and rear fenders on my 2005 B.D. Chopper, to have them sent out to be repainted. The problem is I can not figure out how to remove the wiring from the tail light turn signals, to get the L.E.D. tail lights off the rear fender, HELP!!!:bang:

 

[Jwooky]

If your issue is you can't get the connector through the hole in fender, you have to remove the connector body. If you look very close in the end there is a tang you can depress with a pick that will allow the wire and terminal to slip out of the back.

 

[CoorsBoy]

Tail light removal

J.J. thanks for the quick response. If you wouldn't mind emailing me, I will send you pics. of exactly what I am having problems with. Thanks, Jed W. jrthecoorsboy@comcast.net

 

[HMAN]

You will have to remove the wires from the JWPF connections in order to pull the harness. No way around it unless you cut the wires.

 

[CoorsBoy]

Tail light wiring

Thanks Harry.
Is there a release for the indiviual wires in the JST, or will I have to buy a new JST unit?
Thanks,
Jed

 

[HMAN]

 

[pauldeepsea]

Thanks Harry.
Is there a release for the indiviual wires in the JST, or will I have to buy a new JST unit?
Thanks,
Jed

You will have to release each pin in the connector 3 ea. be careful they are a pain in the ass .

 

[CoorsBoy]

Thanks Harry!

 

[CoorsBoy]

Thanks Paul, I am seeing that P.I.A. part real quick now!!