Read your EHC Fault Lights
- Thread starter Gas Man
- Start date
- Status
Chopper Dave
SIICK!!!
cool shit Gas.....I was looking at mine in my service manual also:up:
alhall88
UAW
ConfusionMy new EHC has 18 LED's ... and the USB style connector.. i wonder what the additional LED's are for...
Fromt he word doc hit print page. Open Paint and copy then save as a jpeg. Upload as you do with any pic.
:flag:
SAYIWONT
Active Member
You could also hit print page and select adobe pdf instead printer and save it as an adobe file. Then post it that way. Just a thought.:flag:
Ohhhh, you guys with the newer bikes have to many lights.Well i just scaned patr of the the page and saved it as a Jpeg.....
I spoke to Kam on the newer ehc. The lights we got are normal. Besides the ignition light which seem to be "flickering".
He said my idea on low voltage sounds ok but he was thinking maybe go back to the standard bulb not the HID. Ray has said it many times about altering the lighting stuff connected to the EHC.
He said my idea on low voltage sounds ok but he was thinking maybe go back to the standard bulb not the HID. Ray has said it many times about altering the lighting stuff connected to the EHC.
Yeah no crap!Ohhhh, you guys with the newer bikes have to many lights.
Serial Port EHC all the way!!!
Fibersnake
Banjo Playing PsychoBilly
Okay I just replaced my new EHC and since it has the 18 lights instead af the 14 or so on the earlier one, can some one please confirm that the lights for the controller and the power are supposed to be lit with switch activated and running. The only other light lit is the ignition and everything seems to be good, however these 2 news lights I am not 100% positive about.
From the labling it would make sense to me to have them on, but if they are like some others, it may be a fault or something.
Thanks in advance.
From the labling it would make sense to me to have them on, but if they are like some others, it may be a fault or something.
Thanks in advance.
- Status