Open primary swap

Energy One
HMAN

HMAN

I just like my Freedom
Supporting Member
@ this point I think BDL is one of the few still in business? Vicious Cycle Works can probably answer a lot of ur technical questions.


BDL Belt Drives / Harley Open & Closed Beltdrives, BDL Belt Drives for Harley Davidson & Custom Motorcycles, BDL HARLEY BELTDRIVES/ SHOVELHEAD BELTDRIVES, PANHEAD BELTDRIVES, KNUCKLEHEAD DRIVES SOFTAILS, BAGGER BELTDRIVES, DYNA & FXR, SPORTSTER BELTDRI - Custom Harley Motorcycle Parts at Vicious Cycle Works

BDL Belt Drives / Harley Open & Closed Beltdrives, BDL Belt Drives for Harley Davidson & Custom Motorcycles, BDL HARLEY BELTDRIVES/ SHOVELHEAD BELTDRIVES, PANHEAD BELTDRIVES, KNUCKLEHEAD DRIVES SOFTAILS, BAGGER BELTDRIVES, DYNA & FXR, SPORTSTER BELTDRIVES/ OPEN & ENCLOSED BELTDRIVES / TECH...
viciouscycleworks.us
 
Last edited:
Mastiff Rider64

Mastiff Rider64

Well-Known Member
Supporting Member
Mickmorris said:
You will be hard pressed to find a open primary for that year currently. Some say BDL is working to provide a open primary option for the RSD bikes. I suppose time will tell. :cheers:
Click to expand...
I spoke with Scott after the first of the year, he said that someone had brought them a 2006 k9 I believe and that they were mocking it up. I'll have to give him another call and see how the progress is coming and let him know that everybody is ready to get their open primaries so they can get them installed before summer. lol
 
Mastiff Rider64

Mastiff Rider64

Well-Known Member
Supporting Member
Well bad news guys, I spoke with Scott about 2 weeks ago and he informed me that the open belt drive project has been shut down. This came as a shock considering that they were so close to finishing one on a bike that someone lent to them as a test bike. But Scot had an accident and has been out of work for about 3 months now, he said when he came back to work he was called into the office of the boss and informed during his time out that they decided to cancel the open primary project due to what it would cost the consumer and that they just don't see the sales numbers needed for them to build one. Scott has told me that when he gets things caught up that he will push for the project to be started again, they do have 1 motor plate that he said they will keep just incase they do start the project again. I hate that I waited 2 weeks to tell you all, but I was hoping he would call and tell me the project was still alive. I will however keep looking for custom parts for our bikes. Speaking of which, check out my new post about the 2009 and 2010 bagger. Think I found us a saddlebag and fairing maker. Talking with Donna and Derek about it now.
 
liferider

liferider

Looking forward to retirement
So what exactly is the difference in the 2003 chopper vs 2006 pit bull or K9? Is it the offset? The length of the primary. BDL makes an open primary for the 2003 chopper it also fits the 2003 soft tail custom HD. So what’s the difference in the primary’s? I do a ton of custom machine work .
 
Mr. Wright

Mr. Wright

Knows some things
liferider said:
So what exactly is the difference in the 2003 chopper vs 2006 pit bull or K9? Is it the offset? The length of the primary. BDL makes an open primary for the 2003 chopper it also fits the 2003 soft tail custom HD. So what’s the difference in the primary’s? I do a ton of custom machine work .
Click to expand...
The DSSC primary is completely different. The starter sits lower and the bolt holes are different.
 
You must log in or register to reply here.
Top