You the guy with the Blue K-9 having an issue where the bike died on you?I have a 2011 k-9 and I seem to have lost power to my ignition module. Does anyone have a wiring diagram?
Should be the same as 08.Yes that’s me. I’m not having much luck finding wiring information
Awesome thanks! Do you think everything is the same for the 2011?Should be the same as 08.
I don't know for sure, but I would assume so.Awesome thanks! Do you think everything is the same for the 2011?
You actually have a K-9 250, I have not seen one in person but I know the speedo is the Medallion one, you also have the HD style rocker switches on the handle bars. I am not sure what controller they put in that bike. Have you tried sending an email to the guys at bigdogisback to see if they know anything about it? Take a few pics of the electronics and the ignition module you have . Does your setup look like this:Awesome thanks! Do you think everything is the same for the 2011?

Yes mine has the HD controls. Bigdog got back with me today and said it’s either the handle bar switch or the ehc. I haven’t had time to look at it againYou actually have a K-9 250, I have not seen one in person but I know the speedo is the Medallion one, you also have the HD style rocker switches on the handle bars. I am not sure what controller they put in that bike. Have you tried sending an email to the guys at bigdogisback to see if they know anything about it? Take a few pics of the electronics and the ignition module you have . Does your setup look like this:
View attachment 66614
Everything works but the ignitionChecked Ignition key switch and the fuse under seat?
Is all dead or only Ignition?
Yes everything works but the ignitionAlso have you lost ALL power to the bike or just to the ignition module? Does everything else work?
For my interest, take a pic of the ehc on that bike. Are there LEDs? You can take the hand controls apart and use your multimeter to test voltage at the switch before and after. Check both sides of the switch. Since its a rocker its easy to test. You said there is no voltage at the coil either?Yes mine has the HD controls. Bigdog got back with me today and said it’s either the handle bar switch or the ehc. I haven’t had time to look at it again
For my interest, take a pic of the ehc on that bike. Are there LEDs? You can take the hand controls apart and use your multimeter to test voltage at the switch before and after. Check both sides of the switch. Since its a rocker its easy to test. You said there is no voltage at the coil either?
Sent from my SM-G892U using Tapatalk
[/QUOTE Yes no voltage at the coil and no leds on the ehc
Switch is good. I did talk to Bigdog yesterday. They don’t have a ehc. I have a Thunder Heart ignition on order. I hate to start cutting wires but I don’t have a choiceThat one pic you posted, looks like black sticky tape over a label. Maybe you can work that tape off and see what's on the label. Might be a part number or something.
That pic looks like a Wires Plus mess with the Deutsche Connectors but that black box must be a different custom unit and why since you have Harley switches just gotta stick with custom style units. Thunderheart ASM unit you can put in is the same the older dogs use just wired slightly differently, it's a good unit.Switch is good. I did talk to Bigdog yesterday. They don’t have a ehc. I have a Thunder Heart ignition on order. I hate to start cutting wires but I don’t have a choice
