I have 05 big dog and bought the Gen 2 kit and I’ve had it apart for some time I’ve been so busy haven’t had time. And I can’t quite remember where all the connectors go as well as the starter wires? I would really appreciate it if someone could tell me which wire goes to what pole on the starter and the other red pole in the battery box area I’m not sure which wires go in it, I got most of the other little connectors except for the horn wires, ignition module, and speed sensor. TYIA, I apologize I know I should’ve taken pics first. But this bike has me ready to rip my hair out and I’m already about 13k into it
New ehc gen 2, confused on starter wiring
- Thread starter Nwhicks21
- Start date
ara pugsley
New Member
i have the same problem aftrr replacing starter
As I recall there’s only 3 connections for the starter. Green wire with spade clip on EHC to solenoid. Black wire from starter to solenoid and the black cable from the battery to the starter& ground. Could be wrong & probably am. Someone else should be along to confirm or let you know what I missed. Good luck!