Need help with air cleaner

RC18

RC18

Active Member
bigkelk9 said:
That's a clean ride! I really like ur front foot pegs, who makes em and do they have matching toe pegs that you know of by chance?
Click to expand...
I need to drill/tap them so I can get 'em sitting right with set screws


Sent from my iPhone using Tapatalk
 
bigkelk9

bigkelk9

Well-Known Member
RC18 said:
I need to drill/tap them so I can get 'em sitting right with set screws


Sent from my iPhone using Tapatalk
Click to expand...
Right one.. well as soon as them damn roulette pegs come in one of these months, I'll go with those, very similar.. cheers broham
 
BWG56

BWG56

Guru
RC18 said:
I need to drill/tap them so I can get 'em sitting right with set screws


Sent from my iPhone using Tapatalk
Click to expand...
They looked a little over center, you could use a layer or 2 of double sided tape. Cut right you won't even see it
 
RC18

RC18

Active Member
BWG56 said:
They looked a little over center, you could use a layer or 2 of double sided tape. Cut right you won't even see it
Click to expand...
Done that...they just roll up like boogers and move upward. Tried little rubber adhesive backed bumpers too.


Sent from my iPhone using Tapatalk
 
bdm7250

bdm7250

Guru
Supporting Member
RC18 said:
I put the same spike from BD PartsKingpin on my bike. Installed, test rode and had the same problem over a certain RPM. Should need nothing more than the bowl vent removed as indicated in the S&S tuning guide. After doing so....ran just like it did right before install.
BTW...I'm pointed forward.



Sent from my iPhone using Tapatalk
Click to expand...
:agree: Was just gonna say the same. Good call.:old2:
 
pauldeepsea

pauldeepsea

Guru
RC18 said:
I put the same spike from BD PartsKingpin on my bike. Installed, test rode and had the same problem over a certain RPM. Should need nothing more than the bowl vent removed as indicated in the S&S tuning guide. After doing so....ran just like it did right before install.
BTW...I'm pointed forward.



Sent from my iPhone using Tapatalk
Click to expand...
What kind of pipes are you running ? Are they transmission mounted?


Sent from my iPhone using Tapatalk
 
Mickeetwo

Mickeetwo

Guru
RC18 said:
I put the same spike from BD PartsKingpin on my bike. Installed, test rode and had the same problem over a certain RPM. Should need nothing more than the bowl vent removed as indicated in the S&S tuning guide. After doing so....ran just like it did right before install.
BTW...I'm pointed forward.



Sent from my iPhone using Tapatalk
Click to expand...

Your filter is different from a D&M Spike filter, the D&M is pointed on the end. I also removed the auxillary vent screw, made no difference on mine

04-23-2014 032.JPG
 
RC18

RC18

Active Member
Mickeetwo said:
Your filter is different from a D&M Spike filter, the D&M is pointed on the end. I also removed the auxillary vent screw, made no difference on mine

View attachment 48702
Click to expand...
The OP stated it was an air cleaner from Big Dog Parts Kingpin which is where mine came from (BDM engineered part). I believe that's the only spike air cleaner they sell. Someone else made reference to the D&M later but I don't believe that's what he has.


Sent from my iPhone using Tapatalk
 
Mickeetwo

Mickeetwo

Guru
RC18 said:
The OP stated it was an air cleaner from Big Dog Parts Kingpin which is where mine came from (BDM engineered part). I believe that's the only spike air cleaner they sell. Someone else made reference to the D&M later but I don't believe that's what he has.


Sent from my iPhone using Tapatalk
Click to expand...

I wasn't sure which one he had. If he has the one you have, your the man to talk to. :oldthumbsup:
 
Last edited:
You must log in or register to reply here.
Top