Made some Big Dog Vinyl Decals

[Twisted]

I believe Postman was referring to the silhouette of a K-9 chopper rather than the letters. Something like this:


I like the K-9 dogtag, that will work for me.

Bowhunter, took me the better part of the morning. I took a photo of a K-9. covered it in transfer tape, traced it and colored it in. Then put in in the program and had to mess with it quite a bit to get it looking good. I didnt mind, cause I wouldnt mind having one myself. Let me know what you think, or if you see anything that needs tweeking.

 

[Twisted]

Well now that I see it blown up, needs a little TLC on the back wheel.

 

[Twisted]

Ok lets try this, messed a little with the back wheel, and in second one, blacked out in between wheel and frame which is more what it would look like, plus adjusted spacing in the spokes. What do you guys think?

 

[Brew]

Nice... :2thumbs:

 

[Twisted]

Thanks Brew!

Cut them out to see how they come out, I think I like the K-9 without the fender strut, what are you guys thoughts. Took a picture before removing vinyl in that area and after, think before looks better, may modify not to cut that spot.

 

[Bowhunter]

I personally like the Upper pic with no space between the rear tire and the fender. It might also look better without the lower handlebar which seems to be too busy above the gas tank.

I will get Postman to get on here and take a look since it is for him, I also have no idea what scale he would want.

I am still waiting on my new truck to arrive, but I measured the back glass of a truck on the GMC dealers lot and the glass is 16 1/4" tall. Can you upscale the dog with K-9 collar to around 14"?

 

[Twisted]

Yeah, the one was supposed to be the aluminum fender strut but comes off looking like a high fender, I like the blacked out better too. Just let me know and if he knows about how long he wants it, I can tell him the dimentions. And I just ordered some new envelopes which are 12.5x15 so a 14"tall decal should not be a problem.

 

[HMAN]

The names look good. Love that Pit! Great job Butch.

 

[Twisted]

The names look good. Love that Pit! Great job Butch.

Thanks, let me know, I could try a different font if you prefer. Also that was just a quick deal, didnt save it. I'd spend some more time getting the sizing and positioning right if you decided you wanted one.

 

[Bowhunter]

I would like to place a order for a quantity of (2) of the dog 'Outlined in white' with K-9 on the dog tag(as seen in post #53). I would like the vertical dimension to be 16". Please work me up a price and I will drop you a check or money order in the mail, I don't mind paying for a mailing tube! PM me your address and a total price if you don't want to put it up on the open forum. I still don't have the truck but I can get the ball rolling on the decal.
Postman wants to thank you for your efforts in the bike decal, he has decided to go with the same decal as I am ordering, one is for me and one is for him.

Thanks again for all the effort you have put into this!

 

[Twisted]

I'll work it up tonight after I find out what a mailing tube goes for, and send you the info to send it out. I'll also let you know the width based on 16" tall. Your sure 16" tall will fit?

 

[Bowhunter]

The truck I have ordered is a GMC Sierra, back glass is solid with a height of 16 1/4". At 16" it will go from the top down to the bottom of the window with 1/8" margin on both ends. I do not have the sliding rear window like you have on your truck.

 

[Twisted]

Green Flamed Logo and the colors I picked up. Only have small quantitied of the colors, each roll was 12"x 5 feet, used a couple feet of green already. Anyone wants sometime done in one of these colors, let me know.

 

[Twisted]

Trying some new ideas, wider flamed logo, new flame logo that is square in dimensions, and a reaper logo.

 

[bigdog1rm]

Thanks for the reply I will measure my window to make sure of the size as soon as I can and place the order.

 

[Twisted]

Bowhunter, got one stripped! Good?

 

[Bowhunter]

That looks killer, I have the truck now and I will post a pic on the forum as soon as I get the decal here. Good work!

 

[Bowhunter]

I posted pics in the other thread, but I will put them up here too.
Here is a close pic of the 16" decal:


Here is the pic from a distance:


Well done Butch.

 

[Jwooky]

Looks killer!

 

[BWG56]

:2thumbs:Sweet