Looking for Karata 3" Belts

[dingo]

Hope everyone is well. Before I go and have them made, wondering if anyone has any Karata 3" belts they would part with. Goodyear Belt No. is: 20218. Size is 3 inch x 127 teeth x 8mm. Thanks.

 

[liferider]

Check with BDL, see if their numbers will cross over

 

[Mickmorris]

There have been a few other members with the 3” karata looking for a replacement belt. Unfortunately to no avail I believe. Pretty sure the BDL 3” I have is a 85 tooth setup. If you find that you can get someone to make one please share the info when you get it here. The last belt I purchased was from D&D Power Drive Belts. Possibly contact them to see if they can help you!

 

[dingo]

Thanks, Gents - will give those a go.

 

[Steven Proctor]

I have the 3" Karata as well and I am keeping my eyes peeled for an extra.

 

[dingo]

Found a place to make me one - poly fiberglass reinforced was only material available - I ordered 1 - told him there may be others interested - he said he would try to get us a group discount if there was enough interest (perhaps about 5+) - Told them I will keep their name confidential for the moment, but will definitely post more when it arrives and share the name for anyone who is interested if it looks like it will work.

 

[Mickmorris]

Found a place to make me one - poly fiberglass reinforced was only material available - I ordered 1 - told him there may be others interested - he said he would try to get us a group discount if there was enough interest (perhaps about 5+) - Told them I will keep their name confidential for the moment, but will definitely post more when it arrives and share the name for anyone who is interested if it looks like it will work.

That’s awesome! Hope it works out for you!! Keep us posted!

 

[Steven Proctor]

Found a place to make me one - poly fiberglass reinforced was only material available - I ordered 1 - told him there may be others interested - he said he would try to get us a group discount if there was enough interest (perhaps about 5+) - Told them I will keep their name confidential for the moment, but will definitely post more when it arrives and share the name for anyone who is interested if it looks like it will work.

That is some great new! I would definatly be interested in a spare or two. I know there are at least two other members on the forum that have mentioned getting spare belts. Hopefully the quality is on point. Looking forward to hearing your review. Hopefully the price was somewhat reasonable. Though I know we don't have much of an option if we want to continue to use the Karata.

 

[JohnBoy]

I guess you guys looked through the Primo stuff as they have belts up to 3.5 inches wide with a variety of tooth count.

 

[Steven Proctor]

I guess you guys looked through the Primo stuff as they have belts up to 3.5 inches wide with a variety of tooth count.

JohnBoy, I haven’t looked into Primo yet. I will investigate.

 

[JohnBoy]

If nothing else ask where they get their belts from

 

[Steven Proctor]

Just looked at Primo. They do have belts, but none specifically for what we need. I need a 3" wide, 127 tooth, 8mm belt. They have a 3" wide 144 tooth, 8mm belt, plus others of various widths, teeth and mm sizes. I will have to call and see if one can be made. Price wasn't too bad for the belts they carry.

 

[dingo]

The belt being made for me is 3" wide, 127 tooth, 8mm belt - will post info as soon as I receive the belt.

 

[dingo]

Price is definitely reasonable...... < $200

 

[Rottweiler]

Great news

 

[dingo]

Belt received - am jammed at work this week but will be inspecting the belt material, testing fit, and will post pics here in a few days.

 

[Rottweiler]

Looking forward to it

 

[paul-man]

Hi everybody. Just a remark in this context. I also have a Karata open belt drive on my Mastiff 2006. As the belt startet to make unusual sounds and always was moving to the outside, I looked for a replacement belt. The first step was to look on the internet. There I found the rest of the still working karata website. According to this site (same number as printed on my belt) my belt should have 127 dents. I counted the dents on mine several times: 137 dents!!! So be careful when buying a new belt. The good news: I found a belt from the manufacturer “Optibelt”. They produce industrial belts with the properties we need. And obviously they produce them in a way that the seller can cut the belts as large as you need. By the way, only the width of the belts is imperial. The distance of the dents (in our case 8mm) and the total length (in my case 1096mm) is metric!
I don’t know if Optibelt is being sold in the USA. If anyone needs a belt doesn’t find one, probably I can help. Also with different sizes and other belt drives!!!
Best regards