Looking for a little help, Please

Energy One
ken294

ken294

Member
I know I'm getting old when I can't figure this out. How do I get this copper lug from the copper wire without ruining either one, so I don't have another week for another bike part. OH! And how do I get the rubber boot cover back into that little hole. Thanks Ken
 

Attachments

Mr. Wright

Mr. Wright

Knows some things
Supporting Member
Two options, you can either cut the end off and replace it, or if it was me, I would order a whole new wire from the Kaptin, pull the starter and replace the whole thing. This way it will save you from having starter problems down the road.
 
ken294

ken294

Member
I'll cut it off I think, but I just came back from H. Depot-they have the right ring hole size but guess what-- it's 5/16" shorter in length--to short to bolt up. I'll keep looking. Thank you Shannon
 
chubs

chubs

Guru
Ken, I know it's redneck engineering, but sometimes in a pinch I have made terminals by pinching the end of 3/8" copper tubing and drilling the stud hole in the flat end.. usually solder them to the wire Might get you by till you can get a proper fix.
 
BWG56

BWG56

Guru
chubs said:
Ken, I know it's redneck engineering, but sometimes in a pinch I have made terminals by pinching the end of 3/8" copper tubing and drilling the stud hole in the flat end.. usually solder them to the wire Might get you by till you can get a proper fix.
Click to expand...
Well that's definitely old school right there, he could even make it a little longer to make up for the distance he cut off, wait to go Chubs:old2:
 
You must log in or register to reply here.
Top