LED headlight

[BadDawg Bill]

Don't forget to remove the set screws before trying to unscrew the outer ring.

There's set screws??? :bang:

 

[francoblay1]

Well.... for once I have been very lucky then.... it took me the whole operation 15-20 minutes.... no dramas with the ring!

 

[BadDawg Bill]

:roll::roll::roll::roll::rollamn your funny Bill...I just wish I lived closer to you so I could share a drink with you occasionally.:flag:

Me too. Got some good apple pie shine if you ever get around this way! The door is always open buddy.

 

[KnotSo]

Put a 'lil silicone on the rings and seal the water out

 

[crowster]

I finally put mine in about two days ago and could not be HAPPIER. This thing is freaking great!!!!

 

[Th3InfamousI]

Wow Franco - thanks for posting. I just bought one and its sitting on the workbench and I'll install it today. This is great!! I'll buy another for the other skoot now!

You just can't possibly argue agaisn't having more light on the ride. Stay Safe out there brothers!:flag:

"A Picture Speaks a Townsend Words"


PIAA Extreme White

LED 2k Lumen

Thanks Curtis. :2thumbs:

 

[Keith S]

Thanks Curtis!!!! I ordered one this morning and it is already shipped. That is great turn around.......now if you could do something about the thermometer outside, that would be great!

 

[KaptinAmerika]

ha....ha......ha
Can't help you there
It was 76 and sunny here today.....:bang::bang:but I still didn't go riding cause I was workin

 

[BadDawg Bill]

ha....ha......ha
Can't help you there
It was 76 and sunny here today.....:bang::bang:but I still didn't go riding cause I was workin

ya, that's what happens when you have to support all those bad habits. :roll:

 

[BadDawg Bill]

Well, I just installed mine on the 07 k9 and it went pretty smooth. Before removing the set screws i sprayed the ring threads with a little pb blaster and every thing came right off. Actually it was uneventful.just don't forget to dab a small amount of anti seeze on there taking rings and blue loctite on the screws:up:.thanks again Curtis one trick that helps is taking 2 small Allen wrenches and use them to spin the retaining ring off. The beauty ring required rubber gloves

Rubber gloves... Now it's starting to sound like the colonoscopy thread...

Well, for the PIA time I had it might as well been a colonoscopy.

 

[francoblay1]

Well, I just installed mine on the 07 k9 and it went pretty smooth. Before removing the set screws i sprayed the ring threads with a little pb blaster and every thing came right off. Actually it was uneventful.just don't forget to dab a small amount of anti seeze on there taking rings and blue loctite on the screws:up:.thanks again Curtis one trick that helps is taking 2 small Allen wrenches and use them to spin the retaining ring off. The beauty ring required rubber gloves

 

[mittens]

yea what buity ring?

 

[mittens]

Pretty sure min ehas just the inner one and not the pretty one.

 

[BWG56]

It looks like you were robbed, no pretty ringnice bars though:up:

 

[Dragonslave]

Just got mine in the mail from Curtis yesterday. Cant wait to put it in. Thanks Curt!

 

[KaptinAmerika]

Pretty sure min ehas just the inner one and not the pretty one.

Yeah you should have a set ring and a beauty ring in that bucket.

 

[mittens]

all i have is what kind of look slike a giant snap ring with 2-3 holes to grab it with and unscrew it form the bucket...

Notihng pretty.

 

[KaptinAmerika]

Mitt, You need a clear adjure with the LED light and a beauty ring on that beast.

 

[Quasimodo]

I got an LED bulb from Curtis since half a year and couldn't be happier. Less drain on the battery when starting the engine and more light in the night.

recommend it :up:

 

[mittens]

Mitt, You need a clear adjure with the LED light and a beauty ring on that beast.

Guess I will add this to my order in a few days.. ha