LED Headlight with bucket
- Thread starter BADOG
- Start date
Mr. Wright
Knows some things
Zoom in to see one.
BADOG
Active Member
Hit Amazon. Adjure bucket and a Sunpie LED. Seperate i
Adjure HB71010-7 7" Ventura Highway Smooth Chrome Combo Motorcycle Headlight Bucket with T70700 Pie Cut Lamp and H4 Bulb
5.0 out of 5 stars 1
$143.98$143.98
tems but will fit and work.
No that's a 7" that would be really big on a dog you need a 5-3/4.
If your headlight housing is in good shape just get the sunpie 5-3/4" on Amazon and take out your lense and plug this one in and off you go. Only about $40
Sent from my Pixel 3a using Tapatalk
If your headlight housing is in good shape just get the sunpie 5-3/4" on Amazon and take out your lense and plug this one in and off you go. Only about $40
Amazon.com: SUNPIE 5-3/4 5.75 Inch Projector LED Headlight for Harley Davidson Motorcycles Headlamp 45W Chrome: Automotive
Buy SUNPIE 5-3/4 5.75 Inch Projector LED Headlight for Harley Davidson Motorcycles Headlamp 45W Chrome: Headlight Bulbs & Assemblies - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Sent from my Pixel 3a using Tapatalk
BADOG
Active Member
Thanks, unfortunately the bucket doesn't come apart but I found this bucket with H bulb and lens on Amazon.
Just don't know if it's plug and play.
Just don't know if it's plug and play.
Jersey Big Mike
100K mile club
The bucket will come apart -- it might be a pain in the ass but it will.
If its a stock bucket the 2 stupid set screws on the bottom might strip out if not careful.
My first K-9 I drilled out the set screw and kept the beauty ring installed with a little clear silicone.
Clubba
Member
I used the stock bucket but replace the headlight with a Hog Lightz unit and I love it. It works awesome!
Sent from my iPhone using Tapatalk
Clubba
Member
Sent from my iPhone using Tapatalk
A DevilDog
Member
Is all big dogs head koghts 5 1/4?
roadie1389
Well-Known Member
I have a 7" on mine. It's bright at night!
roadie1389
Well-Known Member
The stock buckets where 5 3/4.
Clubba
Member
Big Dog makes a special tool for removing the headlight ring. It has three prongs in a triangle configuration with a square adapter in the center that your 3/8 ratchet extension will fit in. Just don’t forget to remove the setscrew at the bottom.
Jersey Big Mike
100K mile club
Almost built one of them years ago (my own design) but I figured I'd never spend that much time inside the HL bucket.
I can count on my finger the number of times I've had to fight with those rings and now that I got rid of the stock bucket never again will it be a problem on my bike.
The headwinds is much easier especially when you're on the road and a bulb goes out.
Clubba
Member
That’s the truth! Headwinds makes some great products.
blackdogg6164
Member
I never worried about the bucket. I just changed out the internals with a Wisamic 5.75. Looks and works great! Make sure to check the headlight projection angle.
