LEAKING TRANNY SEAL

[Dogbone]

tore down and replaced the drive belt side tranny seal. sure hope it dont leak.......

 

[erldawg]

How difficult was it to remove the old seal?

Might consider checking the TP rocker boxes as well.

 

[Dogbone]

just took a screw driver and tapped it out....no problem.

 

[phatchopper300]

Yep having my seal and bearings replace for the same thing. Bigdogtech1 is doing mine. Did you have any play in the pulley. My seal was leaking but when I took off the belt and checked my pulley I had play in it.:bang:

 

[Dogbone]

no play in mine that i could tell. was slowly getting worse....

 

[phatchopper300]

You were lucky. Mine had play :bang:

 

[roughrider]

Do any of you guys know who makes the seal, and a part number? I'm in the UK, and getting parts from the US is painful........ Thanks in advance..

 

[Dogbone]

the seal i used was Timken 412920....it is a metal seal so i used a little permatex sealer on the edge...

 

[roughrider]

Awesome,, thanks Dogbone. Think i can get it over here.......

 

[Chrisnjax]

would you mind saying wear you got the bearing and the seal from ?? and part numbers if you have them .. chris.krash@comcast.net .. much appreciated

 

[chacha]

Seal part numbers here:

http://www.bigdogbiker.com/forums/how/29887-baker-rsd-6-speed-tranny-seal-replacement-pictures.html

 

[Bobby Schulz]

Did you replace the quad seal? Its always a good idea to change it at the same time.