Leak

[Steele1]

So I had new wheel bearings put in my back wheel and when I put everything back together I now have a leak behind my primary.. Has anyone ever had this problem? It's just weird, I thought at first maybe my belt was too tight and caused something but everyone I've talked to says that wouldn't happen.. I have a open primary too btw so I know it's transmission fluid.. If anyone can help that would be great, thanks very much!

 

[Mr. Wright]

Removing your tire may not have had anything to do with it, then maybe it had. When a seal is ready to go, it will just leak.

 

[KaptinAmerika]

Sounds like it might have been time to change out the trans seal as well

 

[pknowles]

Talk to Andrew, aka "Bigdogtech1" he might give you some pointers for trouble shooting

 

[francoblay1]

Talk to Andrew, aka "Bigdogtech1" he might give you some pointers for trouble shooting

X2 :up:

https://www.facebook.com/barnesperformancecycles

 

[BWG56]

Maybe when the back tire/belt was aligned, it was adjusted tighter than before causing more tension on the tranny shaft bearing thats already worn, and the seal is now leaking. Just a shot in the dark, but as stated above, Andrew's da man