Kansas Motor Works

[Raywood]

BDM may be gone but that doesn't mean that you can't get a similar bike. The guys at Kansas Motor Works that left BDM are continuing the bikes but these don't have the issues that BDM had. No EHC...... Oh, and I have always loved that exhaust pipe like I had on my 03 Mastiff. Not many like the 2 into 1's but I do. KMW Regulator
Check them out, they look kool. My favorite bike has always been the Chopper and they have one that looks just like it and I want one. Its called the Regulator. :flag:

 

[woodbutcher]

Is Sheldon somewhere in the background?????

 

[Jwooky]

Not available in US?

 

[DRBarnhart]

If, as their website says, the "bore and stroke are matched at 1-1/8 inches" it doesn't seem like it would have much power...



Dennis

 

[BBChopper]

If, as their website says, the "bore and stroke are matched at 1-1/8 inches" it doesn't seem like it would have much power...



Dennis

1/4" less stroke than the 117? 117= 4 1/8 x 4 3/8?

 

[Letbigdogintocanada]

Wouldn't be able to afford a new one right now,they don't come cheap,lol

 

[francoblay1]

Nice!!!! "BDM" ain´t dying!!!

 

[bearman]

If, as their website says, the "bore and stroke are matched at 1-1/8 inches" it doesn't seem like it would have much power...



Dennis

OK, I did the math, a twin with 1-1/8” bore and stroke works out to a little more than 2 cubic inches.

That’s pretty small.

 

[pknowles]

Spec sheet for the regulator says it has a 111motor.

 

[Raywood]

I've owned owned two BD's the 03 Mastiff (107) and now the 05 Chopper(117). There won't be any difference in the 111 motor between the two.

 

[BBChopper]

OK, I did the math, a twin with 1-1/8” bore and stroke works out to a little more than 2 cubic inches.

That’s pretty small.

:roll:I think he meant 4 1/8"...:roll:

 

[Matt Moore]

Sorry guys. The correct bore should read 4-1/8". PKnowles is correct as all engines are the S&S 111. I just made the necessary changes on our page. Please let me know if you find any other typos. Also, Sheldon is not affiliated with KMW. Lastly, the bikes are available in the US if you are interested. We simply have not launched our US marketing campaign yet.

 

[ro360s]

And they have the 280 40/R20 fat rear tires for our 2008 and up Pitbulls for pre-order. Sweet.

 

[DRBarnhart]

If, as their website says, the "bore and stroke are matched at 1-1/8 inches" it doesn't seem like it would have much power...

1/4" less stroke than the 117? 117= 4 1/8 x 4 3/8?

OK, I did the math, a twin with 1-1/8” bore and stroke works out to a little more than 2 cubic inches.

That’s pretty small.

Spec sheet for the regulator says it has a 111motor.

I've owned owned two BD's the 03 Mastiff (107) and now the 05 Chopper(117). There won't be any difference in the 111 motor between the two.

Sorry guys. The correct bore should read 4-1/8". PKnowles is correct as all engines are the S&S 111. I just made the necessary changes on our page. Please let me know if you find any other typos.

You guys DO realize I was kidding... right?!?!? I was hoping Matt would read my post first and realize the typo. Guess my little smiley face wasn't enough...

If there's a way to take the written word wrong... it will be! :roll:



Dennis

 

[Raywood]

You guys DO realize I was kidding... right?!?!? I was hoping Matt would read my post first and realize the typo. Guess my little smiley face wasn't enough...

If there's a way to take the written word wrong... it will be! :roll:



Dennis

Brat :flag:

 

[DRBarnhart]

Please let me know if you find any other typos.

I'm not sure if this is a typo but under "Specifications" it lists the same front fork length and downtube stretch but looking at the bikes it seems they would be a little different?

But I could be wrong... :bang:

Dennis

 

[pknowles]

It wasn't the smiley face that got me,it was the grinI guess the math speaks for its self

 

[DRBarnhart]

Brat :flag:

Shouldn't you be working on that EHC R.I.P. and taking pics of it (along with your model ) instead of playing on your computer?

Dennis

PS Get well quick!!!

 

[DRBarnhart]

It wasn't the smiley face that got me,it was the grinI guess the math speaks for its self

I guess it was more of a shit eatin' grin than a smiley face... I'll do better.

:2thumbs:

Dennis

 

[Raywood]

Shouldn't you be working on that EHC R.I.P. and taking pics of it (along with your model ) instead of playing on your computer?

Dennis

PS Get well quick!!!

I'm doing a little bit at a time. My gf will kill me if I stay out there all day