Thanks for the reply Neil. Just to update you I was trying to decide between the K&N 3226 and 3260. The 3226 is 2.5" tall, inside diameter 4.625", and outside diameter 6". The 3260 is also 2.5" tall with an inside diameter of 5" and outside diameter of 6.375". I took the stock filter off and measured it to see which would work better. The 3226 was slightly smaller than the stock air filter and the 3260 was slightly larger, but the measurements for the 3260 were closer. I just ordered the 3260 because after measuring I didn't see any issues with clearance and it appears like it will be seated flush against the throttle body plate with no gaps. Same goes for the air filter cover. Should be here in a few days. Worst case scenario it only cost $30 and I can just get the other one. Also the tab on my intake hasn't been broken off as of yet. We'll see what happens when the filter arrives. I saw a while back another member had a similar issue. Sounds like he also went for the 3260 but I believe his had a carb.
