Ignition problems - no spark

[Titan7101]

I have a 02 Bulldog....the LED on the module flashes like it should, so the pickup is good, but I have no spark. Coil or plug wires? Any advice?

 

[Brew]

Might be the cam sensor? Do a thread search, plenty of talk about them...

 

[stlmikie]

If it's not hint on either cylinder at all based on the info you gave it's the coil. You are talking about the ignition module light right?

 

[Titan7101]

Yes, you're correct, the module light....thank you both!

 

[Raywood]

Pull the coil cover and ensure one of the coil wires didn't break off

 

[Titan7101]

I will give that a try....thanks!

 

[stlmikie]

I have a stock coil here if you find that to be the issue.

 

[Lamar]

No Spark

I too have no spark at the plug. When turning over (new battery) the red light on the unit flashes. A local mechanic came by and said just eliminate all of the electronics and put in a crane ignition tapped to the main harness....any thoughts on that, seems too simple. I guess that would eliminate the computer access, but I am not sure I care?

 

[Moespeeds]

I posted this in the other thread, but for the archives, here it is.

http://www.bigdogbiker.com/forums/how/8318-how-bypass-your-ehc-power-your-ignition.html

 

[Moespeeds]

If someone posts up a 2004 chopper wiring diagram I'll mark what wires you gotta cut and repost it.