how to post pictures?

Energy One
Kdub

Kdub

Active Member
I know this is elementary but I still don't know how to post pictures. I have a leaking primary and there is a small hole in front of the primary beneath the fromt cylinder that looks like it is filled with silicone that it may be leaking out of. Anyone know what I'm talking about?
 
S

Sven

Well-Known Member
Here's another approach:

Brackets = I want my brackets to kiss or butt up against the http:... So now a bracket looks like this. []http://www.how-to-postpick.jpg[/]

Forward Slash = Where the question mark is on a keyboard, this is a / forward slash or the closing bracket. The first bracket is an open bracket [no slash], so you need a closing bracket too. This has the forward slash inside the bracket [/].

Code letters = We now need to describe to the computer, how to handle what is inside the bracket? Is it a typed quote or is it a photo? So if we quote someone, see how it says
in the bracket? If we want a photo, the code is typed as 'IMG' for Image or the photo.

Shortcut Key Capture 1 = I'm going to right click on franco's signature photo. A popup window occurs. I want to drill down to "view image" and click on it. I now move up to the address bar at the top with my mouse courser and click on it. I now copy the blue line by holding down Ctrl and pressing C once. If say my mouse did not turn the address blue, I then hold Ctrl down first, press A, then C. I do not let up on the Ctrl key but hit A and C to copy and C is ready to place in between a bracket.

Key Capture 2 = I have my photo address saved when I hit the combo Ctrl + C. Meaning, I can hit the shortcut to capture the photo line and then come back on this message pallet, hit the next keystroke to set the brackets in place. I now hold down Ctrl again in the message pallet, press U. I now have a made set of open and closing brackets with the U for underline. I remove the U's and insert the code letters "IMG" into both brackets. I then move the courser into the middle of both brackets, hold down Ctrl and press V. I should see franco's jpg address in the middle of those brackets. I am ready to send in a photo with my message.

Setup = Here is franco's photo address:

i1255.photobucket.com/albums/hh632/lobito111/WINNER_zps075cae9e.jpg.
http://i1255.photobucket.com/albums/hh632/lobito111/WINNER_zps075cae9e.jpg[img] Take note that I removed the http so the system does not auto-bracket this address line. Also using the same full address, I eliminated the closing forward slash so you can see how the brackets are butted up against the address line. See how the f-slash is missing in the closing bracket? All you need to do is add the f-slash to make the photo happen.

Bracket Glitches = This is also a way to troubleshoot why you see your brackets and address, but no image? Your coding is off. Either you did not butt up against the address; you didn't add the closing slash; you spelled the code different in the other bracket. It does not matter you use caps or low letters or a combo there of. As long as the letter codes spell the correct coding, she'll work.


[img]http://i1255.photobucket.com/albums/hh632/lobito111/WINNER_zps075cae9e.jpg
Click to expand...
 
You must log in or register to reply here.
Top