Headlight ring

Energy One
Th3InfamousI

Th3InfamousI

Administrator
Staff member
Lorenzo said:
Wow! I bought that Daymaker on amazon for $49.99. I got it yesterday and put it in, what a difference! I had to trim the rubber gasket ring a little but pretty much plug n play. My two rings came off pretty easy too. They member that made the suggestion of wearing latex gloves was correct, much easier spinning the outer ring off and back on. I'm going to post pics shortly
Click to expand...
Someone mentioned the rubber gasket to me...I never had one or had left it out at some point and hell if I've noticed a difference.

It is slightly thicker than the halogen where it sits in the housing

Sent from my 2PS64 using Tapatalk
 
Lorenzo

Lorenzo

Active Member
Keeps water from getting behind the light and trapped in the bucket. I actually don't need the rubber since it never sees water
 
USMC03

USMC03

Member
PROFLYER said:
wear some rubber gloves, makes turning them much easier. On the inner ring you can use a punch or an allen to turn it as well. Clean it up really well and put some anti-seize on the threads of both when you re-assemble. I hope you're putting a Daymaker in there!
Click to expand...
+1 that's exactly what I did 2 weeks ago when I put a Day maker in. What a great bulb. Big Kel sent me the link. I'll see if I can find it. 50$ and free 2 day shipping from Amazon.
 
USMC03

USMC03

Member
USMC03 said:
+1 that's exactly what I did 2 weeks ago when I put a Day maker in. What a great bulb. Big Kel sent me the link. I'll see if I can find it. 50$ and free 2 day shipping from Amazon.
Click to expand...
Never mind I didn't read far enough, you've got it. Nice!
 
You must log in or register to reply here.
Top