Head work

[98sporty]

Looking into doing the zero deck cylinders,cam,igniton, etc. Just curious as to what should someone expect to pay to upsize the valves, replace valve guides, and cc the heads? I plan on changing the TP boxes to the S&S boxes. Its an 05 and the valve train is real noisy, and I'm sure it has the same valve sideload that everyone else is having.

 

[MARV]

john sachs is a participating member here who is a well respected builder. pm him for info.

 

[lee]

john sachs is a participating member here who is a well respected builder. pm him for info.

good advice Marv :2thumbs:

 

[Little-Boo]

I sent my heads out to WFOLARRY (Larry's Motorcycle & Machine, Inc in Oak Lawn, IL at wfolarry@aol.com) to be worked on. The heads now have the 2.00 intake and 1.605 exhaust valves, ported, milled .030, Squish Groves, CC’d, flow tested, new valve guides, Bob Woods W188-1200-10L valve springs ($280). I use the Woods W6HF 650 lift cam ($350. The machine shop cost was $659.00.

The Rocker Boxes you will have to get as a kit, a good source would be Nelson at sales@wbcycles.com. You will need

BDM 100-00083 BG PBG Rocker Box Set, DC
BDM 100-00081 BG PBG Roller Rocker Arm
BDM 100-00080 BG PBG Shaft, Rocker Arm
BDM 100-00414 BG PBG Gasket Front Tappet
BDM 100-00416 BG PBG Gasket Rear Tappet
103-000067-00 BG PBG Kit Gasket Top End

All of this goodies ( S&S Rocker Boxes kit ) come out to about $1100.

You might be able to get somne on E-Bay, but will they fit right.

Hope that helps

Carlos

 

[98sporty]

Thanks for the info,I will definitely check with them on the head work.
There is a local guy here I am gonna check with first that I just found out about today. Any information is helpful thanks.