Harbor Freight Lift
- Thread starter awg
- Start date
cdogg556
Guru
Thanks Ernie!
it hits the back of the front fender on k9 due to the way the fender sweeps down and ends up at points.
It only takes 5 minutes with a cutoff wheel and your done with it. Hell I have a condor wheel chock on mine I had to do the same and that thing cost $200
Sent from my 2PS64 using Tapatalk
If you don't have a Angle grinder just pick one up also. Only need to cut off a little quick and easy.
Thanks Eric thats the part of the fender I was concerned about.
Great pic and I really have to get to work on my garage. Ive been wanting to redo it for years.
Hey Eric how much did you have to cut off? I don't have my K9 here right now to measure.
Mr. Wright
Knows some things
If you move the front stop back two holes, it will clear a K9 fender with no modification.
Ok thank you. So would you then put the rear part so the short side pops up when you roll the bike in?
Mr. Wright
Knows some things
Yeah, the flipper thing, short side in back. It's not adjustable. The front stop is mounted two holes back. It does put the rear tire right on the edge, but I now use a lift jack to hold the bike steady, and have no problems. I'll post a picture when I get home.
Mr. Wright
Knows some things
You can mount the chock a little bit more forward to get the bike more up on the table, but be careful if you put a shorter bike on it, like a Harley or Goldwing, it will do a nose dive. Don't ask me how I know.
Okay that's what I thought so if you move it back now you gotta raise the bike to get that ramp off. Just adds a step before you lift it.
Sent from my 2PS64 using Tapatalk
David Watters
Member
Why is there a bike lock on there ??????
cdogg556
Guru
Well i work out of town alot and on multiple occasions my daughter and wife have "accidentally" left the garage door open, so I figure anything to slow someone down won't hurt, we live in a nice area but there are a lot of homeless that live near by at the River and they sometimes cruise down our street, I know it won't stop them, but just might slow them down enough for someone to see or stop them.
David Watters
Member
Got ya I am assuming you made this out of wood.
cdogg556
Guru
No it's 1"x 2" box tubing, I welded it up at work.
David Watters
Member
I love the idea I just want to get the bike up so I can spin the wheels to make them shine.
cdogg556
Guru
It works great for that and everything else, I love it.
David Watters
Member
Could you post the dimensions please if it's not patterned lol.just kidding no need for dimensions I think I have what I need to make something like that.
Last edited: