EHC
- Thread starter Guillaume
- Start date
TheDeadOne
Banned
Brother,
I'm not a 100% sure, but I don't think that BDM used the EHC in the '03 models. I think it was the Thunderheart controller then. '04 is the earliest ehc I've heard of. But I can be wrong.
dead
I'm not a 100% sure, but I don't think that BDM used the EHC in the '03 models. I think it was the Thunderheart controller then. '04 is the earliest ehc I've heard of. But I can be wrong.
dead
BikersDream
We build what you Dream!
Do you still have the very small black box next to the battery? 3/4 by 3" Starter relay. I have one in stock. 770-752-9160
Steve
Steve
BadBrad
2005 Pitbull
My wife has an '03 Mastiff and she has an EHC in her bike. That's what I call it anyway. It's a solid state unit where all wires plug into mounted under her gas tank between the tank halves on the frame.Brother,
I'm not a 100% sure, but I don't think that BDM used the EHC in the '03 models. I think it was the Thunderheart controller then. '04 is the earliest ehc I've heard of. But I can be wrong.
dead
Do you have any fire going to the plugs? Is your battery hot? Has it been load tested? From what I've read, the '03's generally didn't have many issues with the EHC.
G, maybe we can help if you give us some info.Hi Guy,s
I try again have somebody a wiring scedule for a EHC 2003 Husky,because I am in a big Problem right now my bike won,t start at all any help PLS.
Guillaume
Will it turn over?
If it doesn't turn over have you had the battery load tested
If it doesn't turn over do you hear the solenoid clicking
Do you have power to the module (any lights on it)
Do you have spark
Have you checked for fuel
This might help diagnose your problem.
Guillaume
Active Member
Yes I have power and my battery 12.7 v ,Now if I take the ground wire out of the EHC and turn my ignition key my bike start ,if I do the ground back it do nothing if I push the start button , now I took my feul tank off because the EHC is between the tank.
Than also on my battery the litle box the yellow lite is on when I turn the ignition key.
But I a couple wire where loose in the connection to the Ehc module and now I really don,t now if I have the right wires in the EHC , IT,S MY ON FAULT tHAT i DID PAY ATTENSION WHEN i TOOK THEM OUT.
Than also on my battery the litle box the yellow lite is on when I turn the ignition key.
But I a couple wire where loose in the connection to the Ehc module and now I really don,t now if I have the right wires in the EHC , IT,S MY ON FAULT tHAT i DID PAY ATTENSION WHEN i TOOK THEM OUT.
G, it's been a long time since I had my 03 but I think the controller (EHC) is a Thunderheart unit so you might give them a call (ask for Brooke) and they may be able to send you the schematic.
Thunder Heart Electronic Products
TheDeadOne
Banned
G,
This is the '04 EHC, does yours look anywhere near like this?
If not, it's the thunderheart controller.
dead
This is the '04 EHC, does yours look anywhere near like this?
If not, it's the thunderheart controller.
dead
barhopper
Another round please
G is from Europe so give his some slack.English my friend. :roll:
G, check here for a schematic but still call and ask them, they are good people.
Thunder Heart/Tech Support
this one takes a bit to load
http://www.thunder-heart.com/Tech Service PDFs/EI4250.pdf
BadBrad
2005 Pitbull
That's not even close Dead. I thought I had a pic but can't seem to find it. It has a large 9-pin plug in on one end and a couple of 6-pin plug ins. The wire going to the speedo also plugs into it separately. I'll keep looking for the pic, but I don't have a schematic.G,
This is the '04 EHC, does yours look anywhere near like this?
If not, it's the thunderheart controller.
dead
G, can you take a pic of what you have and post it?
TheDeadOne
Banned
What you're describing sounds like the Thunderheart Controller. :2thumbs: But then again, what do I know? :loony::crazy:
:lol::lol::lol::lol:
Last edited:
BikersDream
We build what you Dream!
[Is this what yours looks like? I just pulled this off the Big Dog web site. This is a 2003 Husky controller and Start module. The start module is bad i believe from what you are trying to say here on this thread. Pictutre on right. /B]
Attachments
BadBrad
2005 Pitbull
That top pic is what I'm talking about. If you could see the underside, the plug ins are like I described. I think I have an extra start module if that's what the smaller of the two is. I also have an extra thunderheart (aluminum square with thunderheart etched on it). That still doesn't help G get his wires right.
Maybe with a picture, Dead can get you the correct schematic. After years of porn, he's become totally picture dependant. :roll::roll::roll:
Maybe with a picture, Dead can get you the correct schematic. After years of porn, he's become totally picture dependant. :roll::roll::roll:
Guillaume
Active Member
Yes this is what I have in my bike bd40301b and that other litle thingOke I believe you that the start controller is bad , so I have to order a new one.
Well I let your guy,s now if that is the problem thank,s for the respons guy,s.
And yes I have to speak English sorry for that .
Sincerely
Guillaume
Well I let your guy,s now if that is the problem thank,s for the respons guy,s.
And yes I have to speak English sorry for that .
Sincerely
Guillaume
BikersDream
We build what you Dream!
This is a 2003 wiring for a Big Dog Husky
Attachments
BadBrad
2005 Pitbull
All I can make out is that the small pic on the bottom left is the backside of the EHC. Looks like a 15 pin plug, 2 nine pin plugs and a 6 pin plug. the small slender plug on the far left of that pic is where the speedo plugs into.
G, Did you get the correct wires back into the right plugs? If not, then another start controller may not help you, even if it is the root cause of your problems. I think I have one of those at the house that I'm not using. Send me a PM with your address and I'll mail it to you.
First, make sure everything else is RIGHT!
Didn't you say earlier that if you moved a ground wire, that the bike would crank? I may not have read that right or maybe didn't understand what you said. 
Either way, if you feel the start controller is your problem, I'll send you the one I have. Just say the word.
G, Did you get the correct wires back into the right plugs? If not, then another start controller may not help you, even if it is the root cause of your problems. I think I have one of those at the house that I'm not using. Send me a PM with your address and I'll mail it to you.
First, make sure everything else is RIGHT!
Didn't you say earlier that if you moved a ground wire, that the bike would crank? I may not have read that right or maybe didn't understand what you said. Either way, if you feel the start controller is your problem, I'll send you the one I have. Just say the word.