EHC finally failed

[bfitz]

2005 Chopper. thinking about going with the WP as I put one in my brothers bike years ago with no issues since...when I did it there was a member that put out a step by step instructions...worked much better than the crap instructions WP has...cant find the old post nor the instructions...thought I saved them...also seeing a lot of talk about Docs & Curtis EHC replacement kits...anyone remember who posted WP instructions?...hoping to meet everyone next year in Wichita...go Dogs !!

 

[awg]

Alex here on the forum has redone the EHC. You may want to check them out before tearing into it.

 

[KaptinAmerika]

With the RIP, ESC and now Alex's EHC I can't imagine why anyone would want to put a WP in their bike.

 

[BWG56]

I have the ESC

 

[pknowles]

2005 Chopper. thinking about going with the WP as I put one in my brothers bike years ago with no issues since...when I did it there was a member that put out a step by step instructions...worked much better than the crap instructions WP has...cant find the old post nor the instructions...thought I saved them...also seeing a lot of talk about Docs & Curtis EHC replacement kits...anyone remember who posted WP instructions?...hoping to meet everyone next year in Wichita...go Dogs !!

jake was the member that posted the wire plus instructions. he also sold the kits. I think the ones back around 2010 were more dependable than the more current models. Seems like the tech guy that was a big asset left the firm shortly after. I installed a wire plus on my 07 Bulldog in 2010 but would go a different route today.

 

[awg]

Alex is now selling them on Ebay! Good job!

 

[BadDawg Bill]

jake was the member that posted the wire plus instructions. he also sold the kits. I think the ones back around 2010 were more dependable than the more current models. Seems like the tech guy that was a big asset left the firm shortly after. I installed a wire plus on my 07 Bulldog in 2010 but would go a different route today.

Jake installed my WP and it lasted 200 miles.... Why cut and bastardize your bike when you can plug & play?

 

[powerflo87]

@bfitz does your EHC box have a yellow light on when trying to start it? cause i think i have the same problem with my dog. i went out for a ride and it shut down on me but i still have power the light and all come on just will not turn over? just trying to see if we are having the same problem trying find someone in Georgia to fix or get whats going on with my Dog so i can till the shop they acting funny when i take it sometimes about trying to fix it.

 

[pknowles]

Jake installed my WP and it lasted 200 miles.... Why cut and bastardize your bike when you can plug & play?

"OLD SCHOOL" the only way. If I could I would Bill.

 

[BWG56]

got Axels ehc in the mail today, my plan is to install it Sunday and keep my original(works perfectly) as a back up! Thanks AxelView attachment 32028

No that looks like a true Plug n Play

 

[BWG56]

"OLD SCHOOL" the only way. If I could I would Bill.

I would ride it until it quit and then push it in the canal and call the insurance company and buy a Honda

 

[jackiev]

2005 Chopper. thinking about going with the WP as I put one in my brothers bike years ago with no issues since...when I did it there was a member that put out a step by step instructions...worked much better than the crap instructions WP has...cant find the old post nor the instructions...thought I saved them...also seeing a lot of talk about Docs & Curtis EHC replacement kits...anyone remember who posted WP instructions?...hoping to meet everyone next year in Wichita...go Dogs !!

Guys,
I just replaced my WP with the R,I.P kit. The RIP kit makes much more sense when replacing the original Big Dog module. RIP has all connectors to match up with the original. If you've installed a WP kit, you will have some challenges. Installing the WP kit requires you to cut connectors off and do some splicing.
I did get the RIP kit installed. All lights, horn, turn signals and tach appear to work fine. Only problem is NO START!!!
Coninues to give a stressing starter sound - turn key on, press Start and you hear the starter solenoid kick into place and strain, but the engine will not turn over.
Ended up replacing the battery. SAME!
Fully charged the new battery over night - SAME!
Removed spark plug and turned the motor over several times (starter worked fine with the spark plug removed).
Replaced spark plug. switched key on, pressed start - Whoa Houston we have lift off!
BUT....lots of back fire and associated noises. Definately not running on both cylinders. Turn off quickly and have to re-think this process.
I may have mis connected the cylinder position sensor with the ignition leads. Check tonight after work.
Anyone with other ideas would greatly be appreciated.

 

[bfitz]

@bfitz does your EHC box have a yellow light on when trying to start it? cause i think i have the same problem with my dog. i went out for a ride and it shut down on me but i still have power the light and all come on just will not turn over? just trying to see if we are having the same problem trying find someone in Georgia to fix or get whats going on with my Dog so i can till the shop they acting funny when i take it sometimes about trying to fix it.

My bike has zero lights...and no power....I've checked everything else...so EHC it is...been acting flakey for awhile and finally quit all together

 

[bfitz]

got to tell you guys I'm sour on the whole EHC thing...all the problems they have given the owners etc...that's why I said WP...after reading the posts so far I will check out Alex's fix...but its still an EHC ...so we will see....sorry havnt had time to read up on it..at work right now

 

[Bdm4ever]

Not another bad EHC. Sorry Bill had to replace mine as well.

Some folks on the forum think were given them a bad name cause we f_ _ki_g hate them pieces of shit. They (you know them) say as long as you maintain the EHC it lasts a life time. Hmmmm? What is this the 3rd one this week. Oh no, it's just our imaginations playing games. Clean it up, it'll work fine. BD EHC's are best engineered electrical systems in the world. That's why you need a backup to it and / or a different wiring harness.. But I'm the crazy one.. Not any more, ESC and zoom zoom for me.. No need for a backup either. Cause it works. Good luck.

 

[Bdm4ever]

got Axels ehc in the mail today, my plan is to install it Sunday and keep my original(works perfectly) as a back up! Thanks AxelView attachment 32028

Wondering why a backup if the EHC is so solid and lasts a life time? No matter, just giving you the business cause you like orange..

 

[Bdm4ever]

I have the ESC

X2

 

[pknowles]

2005 Chopper. thinking about going with the WP as I put one in my brothers bike years ago with no issues since...when I did it there was a member that put out a step by step instructions...worked much better than the crap instructions WP has...cant find the old post nor the instructions...thought I saved them...also seeing a lot of talk about Docs & Curtis EHC replacement kits...anyone remember who posted WP instructions?...hoping to meet everyone next year in Wichita...go Dogs !!

I have a copyt of the wire plus instructions if you want them send me an email address and I'll scan and send them to you in the morning.

 

[Little-Boo]

I have a copyt of the wire plus instructions if you want them send me an email address and I'll scan and send them to you in the morning.

I have a copy of the Wire Plus instructions with photos, PM me your e-mail and I'll send you a PDF copy

Carlos

 

[Brew]

Personally, I'd go with the RIP or ESC. They're plug and play, the Wires plus involves too much splicing and combining grounds. JMHO