Clutch Hub, Basket Problem 03

[Five Five]

Checkiing the drive train this weekend and I noticed that when I spin the clutch hub the clutch basket was moving up and down and I could see the primary chain going tight and loose in the stationary position....can this unit be rebuilt or is it trashed...:bang::bang:

 

[waykool]

The shaft appear to be bent?

 

[TheDeadOne]

55, You'll need to pull it down farther to see if it's a broken basket or there is a bad bearing or if the case has been ruined.

Damn, you sure got some bad luck going on. :down:

Sorry!

dead

 

[waykool]

:iagree:What Dead said.

 

[Five Five]

Brand new main shaft on the tranny.....
I will pull the clutch unit and do an inspection on it.
something is bent or broken...
thanks Dead / Kool

 

[chacha]

Hummmmm...who did the tranny rebuild to put the new shaft in? me thinks a bearing is no more....

 

[Five Five]

Hummmmm...who did the tranny rebuild to put the new shaft in? me thinks a bearing is no more....

It's a new tranny less than 300 miles on it.....mainshaft and clutch hub is tru....with less than 0.002" runout.....its the clutch basket that wobbles...