blown head gasgets -tp 107

Energy One
9

93flhtcu

New Member
Hello, I am new to the forum . I have a 2002 bulldog with 20,000 miles on it.The head gaskets have been weeping and finally blew. Th engine is a tp 107. I believe the lower is tp and the upper is a mix of edelbrock jugs and ss heads but I am not sure. I know the lower is definitely tp. Any info or advise before I tear into the motor would be greatly appreciated. Thanks Greg
 
bruce

bruce

Active Member
you can call TP engineering ( duke wainright - vice president), I have talked to several different people over the years and they have all been very helpful. I have also purchased parts from them, most times a little cheaper. 203-744-4960
 
john sachs

john sachs

Well-Known Member
IIRC, TP had issues with their head/head gasket combo ( Edelbrock Heads ) several years ago.:angry:
Apparently the head bolt area needed to be spot faced as the wrong angle was machined during production. :eek:
John
 
Tuck

Tuck

Member
I have a 2001 BD Wolf w/ 107 and the guy at TP told me the only thing on the engine that is true TP are the jugs, rocker boxes, and crank case. BD factory put in edelbrock heads, jims roller rockers, s&s crank and connecting rods, crane cam, jims breather gear, and wiseco pistons. So its pretty much a mutt motor.
 
wolfdog107

wolfdog107

Member
hey tuck sorry for resurecting this old thread but i just got here myself.
you call it a mutt motor like it a bad thing? it looks like you own one is it a bad thing? Im buying one this week and i havent really heard anything bad about TP yet hows yers holding up? all those parts you listed off sound like good parts.
 
Dblbeard

Dblbeard

New Member
Blown Gasket

I just bought a 2005 NBC with a 121 TP motor, the bike has less than 400 miles on it and has been used in shows all it's life, but I blew a head gasket my first day.
I've been talking to them at TP, I'm hoping they will help with it some.

Dblbeard
 

Attachments

You must log in or register to reply here.
Top