Bearing

[Michael rogers]

How can I get the shaft bearing out on the primary side

Sent from my SM-G998U using Tapatalk

 

[Th3InfamousI]

Take a picture of which bearing your referring too, the one in the transmission? What year bike?

Sent from my Pixel 3a using Tapatalk

 

[Jersey Big Mike]

If it's the wheel bearing -- take the hub of, it's much easier then.

 

[Michael rogers]

Take a picture of which bearing your referring too, the one in the transmission? What year bike?

Sent from my Pixel 3a using Tapatalk

Transmission 08 mastiff

Sent from my SM-G998U using Tapatalk

 

[Jwooky]

Transmission 08 mastiff

Sent from my SM-G998U using Tapatalk

They are pressed in, need a puller, which works on the ID, so not really possible with the main shaft in place.

if your bearing are bad, you need to dismantle the entire trans and rebuild.

 

[Th3InfamousI]

They are pressed in, need a puller, which works on the ID, so not really possible with the main shaft in place.

if your bearing are bad, you need to dismantle the entire trans and rebuild.

Worth mentioning they are pressed in but best not to use a shop press on the transmission to press in or out. Should be pressed in manually with ratcheting tools, otherwise you might crack the transmission case. That's a very expensive mistake.

Sent from my Pixel 3a using Tapatalk