I have or maybe had so many problems, my front left fork was leaking fork oil because I allowed someone to drill out the broken bolt that held my format caliper on. I had a warped front rotor that must of snapped the bolt of, I replaced that but someone broke a drill bit off in there, I spent 20 hours slowly drilling that out. I got colbolt drill bits and when I got to the end, the drill bit went to the inside and it started the leak. At first I thought some red locktite may help but it leaked out. I had to rethread it too. I took that all apart and this time I used JB Weld. When I put the wheel back, I stripped the threads holding the wheel to the fork!!! I went out and got longer bolts and was able to get it back. The other part was when I had the rear rotor replaced, my drive belt was too loose! I have never done hay before but I may have fixed that a hour ago, went to test ride it and ran out of gas just out of my driveway! I am headed to the gas station dater I am dome typing this. I just need anyone that may know if everything I did looks right. All I have left now is replaced my rear left side light wire, my tire has worn them down and the shorts out and turns off my speedo!
Thanks,
Bobby