Energy One

422 progressive fit

chubs

Guru
I can assure you I’m not an alias of either one I mentioned. I don’t want to see credit given where it’s not deserved.
So, If you're NOT ker or dentdude, why are you so afraid to show who you really are? I know that I've been seen by at least 50 members here and have no reason to hide behind a computer.
 

woodbutcher

Mr. Old Fart member #145
Staff member
Lifetime Supporting Member
Supporting Member
So, If you're NOT ker or dentdude, why are you so afraid to show who you really are? I know that I've been seen by at least 50 members here and have no reason to hide behind a computer.
my guess is someone that was banned several years ago with an attitude. seems like he has a bad case of penis envy when it comes to the fact that he couldn't get his own website "UP" and running.
 

chubs

Guru
my guess is someone that was banned several years ago with an attitude. seems like he has a bad case of penis envy when it comes to the fact that he couldn't get his own website "UP" and running.
There are a lot of similarities to some of the comments made by the owner of another forum. It's a good indication of how he runs his business.
 
Last edited by a moderator:

roadie1389

Well-Known Member
Yeap, this was taken from a post on FB and was installed on an 04 Chopper. I plan on doing that on my Chopper as well. Tired of bottoming out on bumpy curves.
 

KnotSo

Admin
Staff member
Lifetime Supporting Member
Supporting Member
Yeap, this was taken from a post on FB and was installed on an 04 Chopper. I plan on doing that on my Chopper as well. Tired of bottoming out on bumpy curves.
Got a fb linky so we can all check it out?
 

KnotSo

Admin
Staff member
Lifetime Supporting Member
Supporting Member
From the fb linky provided by raodie1389


Robert's post:
Here is a set of progressive 422 adjustable shocks on my 2004 Big Dog Chopper they fit like a glove I did this last night after work hoping today would be a day I could ride it after work cuz it was nice out but of course the roads are too wet with all the salt on them





Comments

Jonathan LaBorde I’ve had them on my 03 chopper for 7 yrs now. I love them


Robert Davis Jonathan LaBorde you have the same exact ones and so does it make a different ride will I notice a better ride than the stock ones


Jonathan LaBorde Absolutely! My bike was sitting low causing pipes to drag. Put the progressive’s on and no more slump and no more pipe drag


Robert Davis Jonathan LaBorde awesome thank you



Robert Davis Jorge Memo Paredes Oblitas mine is a 2004 Big Dog Chopper
 
So from my experience with the little bit I know
On the 07 k9 model the 422’s would not fit around the transmission plate on the left side of the bike if I recall , I am no engineer but I know you can’t fit a square peg through a round hole .. I am sure this will end up on one site or another but then again I don’t give a shit either way ! Fuck shocks
 

PAUL NOBBS

Member
Yeap, this was taken from a post on FB and was installed on an 04 Chopper. I plan on doing that on my Chopper as well. Tired of bottoming out on bumpy curves.
I had to take my 422s out as it fouled the oil hoses on one side. The end of the barrels have quite a defined edge that chafe. You can get round it by routing a longer oil hose out of the way
 

pknowles

semi-retired...---... GURU C7Z06...---...
Lifetime Supporting Member
Supporting Member
Fuk it... I'm gonna go buy a set, install them, take some pics, then take them off and throw them in the trash.... just for shits and giggles.
Did youever get a chance to mount these on your bike? Nice to have some closure.
 

41bigdawg

Let the Big Dawg eat !
Supporting Member
What a waste...obviously lots of people think these look cool but I don't get it...spend all that money to make it look like that and then you don't ride it??? 534 miles???
 
Top