2004chopper
New Member
My 2004 chopper is stalling when hot and I'm taking off from a stop. Replaced EHC and adjusted the carb. Any suggestions?
Well if it only happens when it's hot and accelerating then sounds like your gas cap is not venting.Just not understanding why a loose connection would only "happen" when bike is hot and accelerating from a stop. seems to me like the engine is just not getting fuel for the that split second and is stalling. For whatever that is worth. I'm by no means an expert...
this is true,,, but it should restart & run fine if you losen the fuel cap,, good call ray.. when it happens losen fuel cap if it has a vaccum your on the right track....Well if it only happens when it's hot and accelerating then sounds like your gas cap is not venting.
![]()
Pull the guts out of it and throw it away. There are threads here on this.I read that could be a cause on another sight. How do I "cure" the problem? Just loosen the cap?
when it does it losen fuel cap.. does air rush in??? like a vacumm,,, I dont much think of a vaccum as I bought a cutom billet fuel cap from low down chop shop.. I never have that problem anymore..would an engine stall release built up pressure in the fuel system? That's why it fires up immediately when turned over?

