2002 pitbull console???

[Derek1974]

Any ideas where to get a new one?

 

[pauldeepsea]

Any ideas where to get a new one?

Are you talking about the anuciator? Shows turning signals, high beam etc?
I am not sure if www.wildsteedworx.com
Sell them. May want to try shovelheadkicker ? Forumn member on here Derrick. He sells all kind of big dog parts

 

[Derek1974]

Thanks. Im looking for the plastic piece that it mounts into that runs the center length of the tank. Mine is cracking at the end near the seat.

 

[Dragonslave]

Any ideas where to get a new one?

I think Derek & Donna have them. @bigdogpartsking

 

[Derek1974]

I think Derek & Donna have them. @bigdogpartsking

Thanks! I'll check it out. Greatly appreciated.

 

[Dragonslave]

Thanks! I'll check it out. Greatly appreciated.

Sometimes they post them on ebay.

 

[HMAN]

If by chance they don't have one, try ur local favorite body shop. Some new 'glass and they may be able to save urs?

 

[Derek1974]

Really glad I joined this sight. Great people!

 

[chubs]

Flattery will get ya everywhere---- Maybe try J B Weld?? Surprising what ya can fix with that stuff!!

 

[chubs]

One other piece of free advise, Don't tighten that rear bolt too much. You can see it start to get distorted and that helps cause the cracking !! I just run mine down till it doesn't slip back and forth easily, You'll see it start to deform pretty quick.

 

[DynoDave]

It's called a dashboard. I fixed mine with Hysol 9462 epoxy and carbon fiber cloth. Worked great and has held up after 4 years.

 

[pauldeepsea]

Are you talking about the anuciator? Shows turning signals, high beam etc?
I am not sure if www.wildsteedworx.com
Sell them. May want to try shovelheadkicker ? Forumn member on here Derrick. He sells all kind of big dog parts

Misquoted wrong forumn member , meant bigdogpartsking

 

[pauldeepsea]

One other piece of free advise, Don't tighten that rear bolt too much. You can see it start to get distorted and that helps cause the cracking !! I just run mine down till it doesn't slip back and forth easily, You'll see it start to deform pretty quick.

Also make sure you have a washer on the bolt that tightens the plastic down