If you value your paint, I'd put the protective film package on your fender regardless of whether you use the P-pad or go with a 2-up seat. Big Dog Motorcycles BIG DOG MOTORCYCLES SURFACE PROTECTION TAPE- REAR FENDERI am thinking of buying a 2up seat. My question is are they worth it?
I have the little passenger one I am currently using but the suction cups keep tearing off and it is scratching my paint up. I am thinking of getting an 2up seat so what are the pros and cons of them?![]()
I too am looking for a 2-up seat. Bike is a rigid and the wife and I went on a 130 mile run yesterday. I have the suction-seat and she swears she'll never ride again with me until I get the 2-up with sissy bar. She had to soak in epsom salt that night. My cruiser had the passenger set up and she loved the ride. I was quoted at over $1,300 for just a sissy bar, no seat :down: . Looking for more resources before I go with this one dealer.So I take it with the 2up seat you still get the suction cup damage also?
What about comfort? are they better for the passenger or are they basically the same?
If there are no pros to the 2up sounds like i should save the money and just buy another pad for her.
Big Dog pads the bottom of their seats pretty well, but I had a Harley where the paint was rubbed off under the seat :angry: after a long 2-up ride due to the stock seat NOT having adequate protection for paint :bang:So I take it with the 2up seat you still get the suction cup damage also?
What about comfort? are they better for the passenger or are they basically the same?
If there are no pros to the 2up sounds like i should save the money and just buy another pad for her.
Are you lifting the tabs to release the suction cups or just pulling the pad up to get it off?I am thinking of buying a 2up seat. My question is are they worth it?
I have the little passenger one I am currently using but the suction cups keep tearing off and it is scratching my paint up. I am thinking of getting an 2up seat so what are the pros and cons of them?![]()
you can replace the cups. i have found them on ebay.this was the first suction seat I owned and I did not realize you had to pull on the tabs so I ruined the first one. but before I buy another one I was going to look at the 2up and decide which one to buy. I am not getting alot of pros for the 2up for the money so I think I will just stick with the pad.
yep! just measure what you have and head to ebay.i will look for the replacements for the cups!! awesome I did not know they had them out there.
just looked and don't see any at the moment. there is someone selling suction cup p-pads. maybe email them and see if they have them or try one of the parts places that sell seats like jpis there a certain place or wording to use to find them? I could not locate them on ebay
Hello, I happen to be reading the Forum on 2Up Seats. I know this post is old, but wanted to ask if you had that seat made that you are referring too. If so, how have you liked it over the years? Do you have any pictures of it. ThanksIf you value your paint, I'd put the protective film package on your fender regardless of whether you use the P-pad or go with a 2-up seat. Big Dog Motorcycles BIG DOG MOTORCYCLES SURFACE PROTECTION TAPE- REAR FENDER
I'm having a custom 2-up seat made with LOTS of gel pad and memory foam, plus having them build it up so there's some lower back support. This is the seat I'll mainly use for longer trips. I don't have a luggage rack, so I'll strap my bag onto the sissy bar, turn it around and sit it on the passenger portion of the seat for even more back support. And I'm definitely putting the protective film on my bike to protect its paint.