Scooter33
Member
First off when I hit the start button I get 2 different reactions. #1 starter engagement but no turn over. I release the button then hit it again this time it will buzz like the battery is low on juice, but it is not cuz it is new and above 13 volts. On the third try it will turnover but it is slow to fire. In other words I let the starter spin until it fires. :angry: I think the starter might be bad or about to go out, it is the original from 2007.
2nd Issue, when it feels like it will back fire through the carb. That :angry: gets me very angry. The carb set up is as follows D&D air cleaner, 31 intermediate jet, 78 main, air fuel in the middle point, air bleed is factory jet & the acc pump is about 2 turns out. Pluggs look slightlyvsooty around the threaded end and the ceramic is a light grayish color. Also a VH 2 into 2 Exhaust. :bang:
I welcome any input on these topics,
Scott
2nd Issue, when it feels like it will back fire through the carb. That :angry: gets me very angry. The carb set up is as follows D&D air cleaner, 31 intermediate jet, 78 main, air fuel in the middle point, air bleed is factory jet & the acc pump is about 2 turns out. Pluggs look slightlyvsooty around the threaded end and the ceramic is a light grayish color. Also a VH 2 into 2 Exhaust. :bang:
I welcome any input on these topics,
Scott

