107, Super G, pucking fuel when pitcock opened and hot?

[Dragonslave]

It's not from me, BB Chopper makes them! I love his work, he truly is an artist!

Sorry I just assumed but they are bad ass!

 

[liferider]

Sorry I just assumed but they are bad ass!

BB Chopper is a member on here. PM him about his gas caps. Had mine to me in about a week

 

[francoblay1]

Removing Paint Saver: http://www.bigdogbiker.com/threads/paint-saver-ring-removal-tool.57915/#post-600655

 

[mittens]

So I removed the white one way valve in the bottom of the gas cap. It only allows air into the tank (so fuel can flow out) but when pressure builds up, and you open the pit cock it has to push out somehow.. We will test how it does with the cap venting both ways now.

 

[FrankBDPS]

Wasn't there a thread on here about removing those things?

 

[francoblay1]

Wasn't there a thread on here about removing those things?

Yes, several threads about this.

Mittens, you will be fine now. what you did is exactly what needs to be done to the stock caps.

 

[liferider]

Mitten another problem you may face with the stock cap is if it starts getting hard to unscrew the cap. The treads are made of composite material that ethanol gas sometimes effects it. That's what happened to me. The material swells! That's why I switched to BB Choppers gas caps!

 

[mittens]

Yes Mine has been "tight" to unscrew since i got the bike. So guessing thats the problem.

The new pop up gas cap will be here this week. will play with that and the madified stock one.

BB said he was pretty busy so, this will have to do for now.

 

[Th3InfamousI]

Yes Mine has been "tight" to unscrew since i got the bike. So guessing thats the problem.

The new pop up gas cap will be here this week. will play with that and the madified stock one.

BB said he was pretty busy so, this will have to do for now.

Not much to play with on the new one from Amazon it ain't gonna fit!

 

[francoblay1]

Isn't there a guy on here that has the special tools to remove the paint savers? And the skills to use them too.

You are talking about Ker and his Hammer & Chisel???

Here, check this out: http://www.bigdogbiker.com/threads/removing-stock-gas-cap.42924/

 

[mittens]

Not much to play with on the new one from Amazon it ain't gonna fit!

Truth, came in yesterday, and No go haha.. will return it.

 

[liferider]

Still say, call BBChopper, he might be busy but he will work it into his schedule! Remember true artist are pain in the ass but there work is Soooo worth it!

 

[Dragonslave]

I got these for my 04 pit. Not sure if they will fit your bike though.

http://www.amazon.com/dp/B000GZT0JG...vptwo=&hvqmt=e&hvdev=c&ref=pd_sl_4ywtmfnqwx_e

 

[francoblay1]

I got these for my 04 pit. Not sure if they will fit your bike though.

http://www.amazon.com/dp/B000GZT0JG...vptwo=&hvqmt=e&hvdev=c&ref=pd_sl_4ywtmfnqwx_e

That looks the same I installed on my K9. I did need to get rid of the stock bung. Didn't you?

 

[Dragonslave]

Yes it had to come off.

 

[Dragonslave]

I had to buy 2 of them though. I have a split tank.

 

[FrankBDPS]

I have those on my tanks. I get a lot of compliments on them.

 

[liferider]

Maybe I'm just hung up! BB's gas caps screw into your existing paint saver and ya'll still want to look else where? I don't get it!!!!

 

[mittens]

he said he was busy... you are prosistant though ha i will give you that.

I hope my free fix is just that, FIXED.

 

[Dragonslave]

I was just giving him another option just in case he was too busy.