Money
Member
Hola, another Big Dog that won't start. The weird thing is before the bike shipped from Houston to Vancouver Washington to me the bike was tested several times and started with no problems. Since I got the bike it won't start. I've replaced the battery and load tested it and everything seems to be plugged in or in other words no-lose connections that I can find. My question is should the EHC lights all be illuminated when the bike is running properly. All I am getting after the initial flash when the key is turned on is a steady yellow and a flashing green lite. The two are the closest to the PIN connector. If I hit the run button on the hand controls a red lite illuminates and stays on but that is it. HELP!!

